| Sign In | Join Free | My burrillandco.com |
|
...slider stepper motor 3.3V DC screw stepper motor with bracket VSM08248 is a special micro stepping motor (or linear stepping motor), with a bracket and a movable slider (when the motor rotates, the slider wi...
... is 18 degrees, and it takes 20 steps to complete a revolution. The thrust of the motor is about 120~ 150g (thrust is 1.2~1.5N), and the frequency is suitable (300~800PPS). Please ensure that the load of the...
...standard M2*P0.4 lead screw, and motor step angle is standard 18 degrees. Thus it takes 20 steps to rotate one turn, and motor’s step length is 0.02mm/step (step length means the linear distance it travels w...
..., the motor rotates 20 steps per revolution, and the commonly used pitch of the screw is 0.4 mm, so the position control accuracy can reach 0.02 mm. If you ......
...slider linear stepper motor with 4 pins FPC Description: This VSM10152 motor is 10mm diameter linear stepper motor with lead screw + slider. Step angle is regular 18°/step, lead screw is M2*P0.4, step length...
... to provide precise linear motion. This motor has a travel per step of 0.02mm, a motor type of Linear PM Stepper Motor with Slider, a coil resistance of 20Ω/phase, a pull-out thrust of 80g min (500 PPS) and ...
...camera lines KHN-M66N6-XXX YG100, YS100, YS12, YG12, YS24 and other camera lines KHN-M66N6-XXX We also supply the below products: KU2-M7165-00X Dispensing Accessories SHAFT GEAR Global nozzle 51305201 nozzle...
... bearings, and they can provide strong support to the slider, and make sure slider can move fluently when the load goes up. Lead screw is regular M3 screw, pitch is 0.5mm, and the motor step angle is 18°/ste...
...slider stepper motor features: SM15-45L is a precision micro step motor, the output shaft with a pitch of 0.5mm of the screw, through the screw and the screw rod supporting the turn of the screw into a thrus...
...standard M2*P0.4 lead screw, and motor step angle is standard 18 degrees. Thus it takes 20 steps to rotate one turn, and motor’s step length is 0.02mm/step (step length means the linear distance it travels w...
...slider motor 12VDC linear stepper motor 2-phase 4-wire Stepper Motor SM1504 is a precision micro step motor, the output shaft with a pitch of 0.5mm of the screw, through the screw and the screw rod supportin...
...slider linear stepper motor Description: This is a 15mm stepper motor attached with lead screw and slider. Lead screw is regular M3*P0.5, and travel distance (stroke) is determined by lead screw length. If c...
...Motor is a stepper motor with slider, designed to provide precision linear motion. It is equipped with a pull-in torque of 3.5 Gf.cm at 480 Pps, 2-phase excitation, and supports CW/CCW rotation. This stepper...
bipolar drive 20mm NEMA8 micro slider stepper motor lead screw 66mm stroke linear motors features: SM20-66L is a precision micro stepping motor, the output shaft has a lead screw with a pitch of 0.5mm, and the ...
... by the screw and the screw to rotate into thrust. Effective stroke of motor screw 40mm The basic step angle of the motor is 18 degrees, and the motor runs 20 steps per week, so the displacement resolution c...
...slider screw stepper motor 5v linear stepper motor VSM10198 is a precision lead screw motor ,the output shaft with a pitch of 0.4mm of the screw, through the screw and the screw rod supporting the turn of th...
...slider Linear Stepping Motor 5V lead Screw motor withprecision medical devices Stepper Moto VSM1069 is a precision lead screw motor ,the output shaft with a pitch of 0.4mm of the screw, through the screw and...
...slider Linear Stepping Motor Screw motor with Bracket Stepper Motor VSM1069 is a precision lead screw motor ,the output shaft with a pitch of 0.4mm of the screw, through the screw and the screw rod supportin...
...slider screw stepper motor 12V DC pm stepper motor SM20-35L is a precision screw motor with a pitch of 0.4mm between the output shaft and the screw. The rotation of the screw and the screw support the screw ...
...slider screw stepper motor 6V DC pm stepper motor SM15-45L is a precision screw motor. The pitch between the output shaft and the screw is 0.4mm. The rotation of the screw and the screw supports the screw to...