| Sign In | Join Free | My burrillandco.com |
|
...h Low-Power Schottky TTL (LSTTL). The 74HC245; 74HCT245 is an octal transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The 74HC245; 74HCT245 features an o...
...Transceiver with Integrated Isolated DC-DC ISO 11898-2 1Mbps High CMTI SOIC-20 Package for Industrial Networks and Motor Control andnbsp; FEATURES 2.5 kV rms signal and power isolated CAN transceiver isoPowe...
...Bus 1 Features Bidirectional Transceivers Meet or Exceed the Requirements of ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27 Designed for Multipoint Transmission on Long ...
... controller and the physical bus in a LIN. It is primarily intended for in-vehicle sub-networks using baud rates from 1 kBd up to 20 kBd (/20 variant) and is compliant with ......
...Transceiver, 1000BASE-T Copper GBIC Transceiver Features: Hot-pluggable GBIC footprint Extended case temperature range (0°C to +70°C ) Low power dissipation (1.05 W typical) Compact RJ-45 connector a...
...m signal faults on communication bus lines. Each device contains one differential line driver with three-state output, and one differential line receiver with three-state input. The 1/4-unit-load receiver in...
...Transceiver with 10Mbps Data Rate • RS-485 and RS-422 Transceiver • Operates from a single +3.3V Supply • Interoperable with +5.0V logic • Driver/Receiver Enable • -7V to +12V Common-Mode Input Voltage Range...
...Transceiver IC Chips 3.3 V for Power/energy metering ±15 kV ESD-Protected, 3.3 V,12 Mbps, EIA RS-485/RS-422 Transceiver Order Guide: ADM3485EAR ADM3485EAR-REEL7 ADM3485EAR-REEL ADM3485EARZ ADM3485EARZ-REEL7 ...
...Transceiver with 10Mbps Data Rate • RS-485 and RS-422 Transceiver • Operates from a single +3.3V Supply • Interoperable with +5.0V logic • Driver/Receiver Enable • -7V to +12V Common-Mode Input Voltage Range...
...m signal faults on communication bus lines. Each device contains one differential line driver with three-state output, and one differential line receiver with three-state input. The 1/4-unit-load receiver in...
5.8 GHz DSRC RF module (DSR-series) Bi-directional short range (~500m) communication between the OBE (On-Board Equip.) in cars and RSE (Road-side Equip.) DSR-series for use in the RF part of the systems (OBE & ...
5.8 GHz DSRC RF module (DSR-series) Bi-directional short range (~500m) communication between the OBE (On-Board Equip.) in cars and RSE (Road-side Equip.) DSR-series for use in the RF part of the systems (OBE & ...
5.8 GHz DSRC RF module (DSR-series) Bi-directional short range (~500m) communication between the OBE (On-Board Equip.) in cars and RSE (Road-side Equip.) DSR-series for use in the RF part of the systems (OBE & ...
... data rates of up to 1 Mbps Short-circuit protection on CANH and CANL against shorts to power/ground in 24 V systems Unpowered nodes do not disturb the bus Connect 110 or...
...Transceiver reputation based Product Description: Supports 1 Mb/s operation Implements ISO-11898 standard physical layer requirements • Suitable for 12V and 24V systems Externally-controlled slope for reduce...
Triconex Dcs Module 2658 MCP High-Speed CAN Transceiver New spot folding Product Description: The CAN bus has two states: Dominant and Recessive. A Dominant state occurs when the differential voltage between CA...
Triconex Dcs Module 2658 MCP High-Speed CAN Transceiver New spot folding Product Description: The CAN bus has two states: Dominant and Recessive. A Dominant state occurs when the differential voltage between CA...
...Transceivers General Description The MAX3080–MAX3089 high-speed transceivers for RS-485/RS-422 communication contain one driver and one receiver. These devices feature fail-safe circuitry, which guarantees a...
... for full- and half-duplex communication on multipoint bus transmission lines. They are designed for balanced data transmission, and they comply with TIA/EIA standards RS-485 and RS-422. The devices have an ...