| Sign In | Join Free | My burrillandco.com |
|
...package • Features eliminate or reduce cost of external components • Fully integrated soft-start for minimum stress/overshoot • Externally programmable accurate current limit • Wider duty cycle for more powe...
... 1.5 A Requires only COUT = 1.0 μF for stability anyCAP = stable with any type of capacitor (including MLCC) Current and thermal limiting Low noise 2.8 V to 6 V input voltage range −40°C to +85°C ambient tem...
... only CO = 1.0 µF for stability anyCAP is stable with any type of capacitor (including MLCC) Current and thermal limiting Low noise 2.7 V to 8 V supply range −40°C to +85°C ambient temperature range SOT-223 ...
... mode ► Guaranteed output current of 1.5A DC ► Available in TO-263, TO-220 and SOT-223 packages ► Minimum output capacitor requirements ► Overtemperature/overcurrent protection ► −40˚C to +125˚C junction tem...
... 1.5 A Requires only COUT = 1.0 μF for stability anyCAP = stable with any type of capacitor (including MLCC) Current and thermal limiting Low noise 2.8 V to 6 V input voltage range −40°C to +85°C ambient tem...
... only CO = 1.0 µF for stability anyCAP is stable with any type of capacitor (including MLCC) Current and thermal limiting Low noise 2.7 V to 8 V supply range −40°C to +85°C ambient temperature range SOT-223 ...
... DC ► Available in TO-263 and TO-220 packages ► Output voltage accuracy ± 1.5% ►Error flag indicates output status (LP3963) ► Sense option improves load regulation (LP3966) ► Minimum output capacitor require...
... only CO = 1.0 µF for stability anyCAP is stable with any type of capacitor (including MLCC) Current and thermal limiting Low noise 2.7 V to 8 V supply range −40°C to +85°C ambient temperature range SOT-223...
...THD+N) •3.3-V and 5-V Operation • No Output Coupling Capacitors Required • Shutdown Control (IDD = 0.6 µA) • Uncompensated Gains of 2 to 20 (BTL Mode) • Surface-Mount Packaging • Thermal and Short-Circuit Pr...
...Output Current in Excess of 500 mA (400mA for SOT-223 package) • Output Trimmed for 5% Tolerance Under All Operating Conditions • Wide Output Capacitor ESR Range, 0.01Ω up to 5Ω • Internal Short Circuit and ...
... into a low profile (1mm) ThinSOTTM package. The LT3470 combines Burst Mode and continuous operation to allow the use of tiny inductor and capacitors while providing a low ripple output to loads of up to 200...
... in Excess of 1A. ・Satisfies IEC-65 Specification. (International Electronical Commission). ・Package is DPAK, TO-220IS ・Suitable for MLCC, Tantalum and Low ESR Electrolytic Capacitors. ・Suffix U : Qualified ...
...REXT) and capacitor (CEXT) values and the operating temperature. Other factors affecting the oscillator frequency are: • threshold voltage variation • component tolerances • packaging variations in capacitan...
GRM32ER61E226KE15L.jpg Chip Monolithic Ceramic Capacitor 0805 X5R 10μF 6.3V The MMG15241H is a high dynamic range, low noise amplifier MMIC, housed in a SOT --89 standard plastic package. It is ideal for Cellul...
LP2983 Micropower 150 mA Voltage Regulator in SOT-23 Package For Output Voltages ≤ 1.2V Designed for Use with Very Low ESR Output Capacitors General Description The LP2983 is a 150 mA, fixed-output voltage regu...
..., resistors and capacitors, into a single chip. It is used in many applications, including consumer audio. Our Integrated Circuit IC is specifically designed for audio signal processor, with an I²C interface...
... bootstrap capacitor, and control interface such as PWM, I2C, SPI and Analog, these Power Supply Integrated Chips are available in various package types such as SOP, SOIC, QFN and DIP with integrated inducto...
... capacitor with low leakage current in a compact package size is required.They are widely used in applications such as medical,electrical grid,IGBT driver circuits and similar where: 1.The voltage of the inp...
... capacitor with low leakage current in a compact package size is required.They are widely used in applications such as medical,electrical grid,IGBT driver circuits and similar where: 1.The voltage of the inp...
...bit digital attenuator utilizes an off chip AC ground capacitor for near DC operation, making it suitable for a wide variety of RF and IF applications. Covering DC to 4 GHz, the insertion loss is less than 0...