| Sign In | Join Free | My burrillandco.com |
|
Diameter 50mm Test Probe A Made Of Stainless Steel And Nylon, Accord With IEC60529 IP1 Product introduction: This probe made of stainless steel and nylon, the sphere made of stainless steel, the baffle and han...
...verify the protection of persons against access to hazardous parts, and to verify the mechanical strengthen of openings in the enclosure or internal barriers. Test sample: Electrical outlet or similar electr...
...Test Probe 2 With Force of 30N, IP Code - IP2X The product is made of nylon and stainless steel. The nylon part of the handle is black, and the probe part is a 12.5mm stainless steel ball. The scale part is ...
IT Test Probe Ø12mm, 80mm long with tip radius 6mm Conforms to IEC60950, GB4943...
IEC61032 Rigid Finger Test Probe 11 customized with 50N or 75N Force Introduction: The rigid finger probe is designed according to IEC61032 figure 7 and UL clauses. This probe may be used to verify the protecti...
... parts UL1278 (PA130A) Probe for film-coated wire of fan UL507 (PA135A) 3. Specification Rigid finger length 101.6mm (4 inch) Rigid finger ......
UL507 PA135A Accessibility Test Probe for Uninsulated Live Part Nylon Handle + Stainless Steel Finger 1. Description: UL accessiliby test probe for uninsulated live part is designed according to UL507 figure 9....
IEC 61032 Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification Standards & Clauses: IEC61032:1997 “Protection of persons and equipment by enclosures-Probe for verification” IEC60...
...Test Probe Of Figure V.3 Product information: The blunt probe of figure V.3 conforms to IEC 62368-1:2018 clause 5.3.2, 5.4.10, V.1.4 and figure V.3, IEC60950 figure 2C, IEC60065 figure B1, IEC62151 figure 3 ...
...This probe is intended to verify the basic protection against access to hazardous parts. It is used to verify the protection against access with finger. Specification: Diameter of dactylogryposis: 12mm ......
IEC 60335-2 Rigid Finger Test Probe 11 With Force 50N Product Information For Rigid Finger Test Probe 11: This rigid finger probe conforms to the standard requirement of IEC IEC60335-2-6 clause 22, IEC60335-2-9...
...'s arm. This allows designers, engineers, and researchers to assess various aspects of the product, including comfort, usability, and functionality. By placing the probe in or on the product, they can evalua...
Test Probe A with Built-in Force for IEC61032 IP1X Safety Compliance Product information: It conforms to the standard requirements of IEC61032 fig.1, it is required by IEC 60335-1 clause 22.1, IEC60529 IP1X , I...
... for anti-electric shock test when equipped with amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer) .T...
... for anti-electric shock test when equipped with amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer) .T...
...Probe ultrasonic testing probes repair crtstal 1. Frequency: 5.0-8.0Mhz 2. Compatible system: Voluson S10, Voluson P8 3. Application: OB/GYN & urology 4. original, in good working condition 5. With 90 days w...
...Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing or ...
...2018 clause V.1.3 and figure V.1 (but straight unjointed version), and etc. It is used in the enclosure protection test of the electrical equipment that likely to be accessible to the children.Easily accessi...
...Testing Using Test Probe 14 Product information: Standard:Conforms to IEC 60335-2-82, test probe 14 IEC 61032 etc. Application:It is used to verify the protection against access to hazardous live parts of so...