| Sign In | Join Free | My burrillandco.com |
|
... all insulation materials of electrical enclosure, external components and plastic. Trial is that the sample placed on the platform of inside constant temperature under 125±2Degree, coupled with the ball-sid...
... This Ball Pressure Tester applicable to assessment of heat-resistant fro all insulation materials of electrical enclosure, external components and plastic. Trial is that the sample placed on the platform of...
...stainless steel length :200mm Test Method: The enclosure and its external mechanisms shall be subjected to a stream of water from a hose that has a 25mm(1 in) inside diameter nozzle that delivers at least 24...
... the seal to the extent that the equivalent plane wave power density of microwave radiation emitted exceeds 5 mW/cm 2 at any point 5 cm or more from the external surface of the enclosure when subjected to th...
Pendulum Hammer ,IEC 60068-2-75 Test Eha: Pendulum hammer 1. Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) 2. IEC 62262:2002 /IEC 60068-2-75...
... Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (Cr (VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers (PBDE) PC BD ASSY X O O O O O ENCLOSURE O O O O O O O: Indicates that this tox...
... / fully sealed, daylight viewable touch screen monitor offers extensive features, is housed in a gasket sealed stainless steel enclosure, is incorporated with a 1000 nit (cd/m²) bright active matrix TFT dis...
... as high as 5,000 nits, ITD high brightness LCDs shine bright in direct sunlight—making them the ideal solution for outdoor enclosures and window-facing applications. FEATURES Super High Brightness 1500~5000...
...enclosure, compact, seamless,low weight design. 2. Front panel IP65 waterproof. 3. Good mechanical properties, excellent heat dissipation. 4. High performance mainboard, 7x24 continuous operation. 5. VGA+HDM...
... specifications ; Future generation panels phased-in without external changes; High quality panel with high brightness,high contrast ratio and broad viewing angle; Multiple mounting options ......
.... RJ-45 connector with 10/100 BASE-TX magnetic. Comply with RoHS requirements-whole part No Cd, No Hg, No Cr6+, No PBB and PBDE and No Pb on external pins. Operating temperature range: 0℃ to +70℃. Storage te...
... to save PCB Board space. Reduced EMI radiation to improve EMI performance. Comply with RoHS requirements-whole part No Cd, No Hg, No Cr6+, No PBB and PBDE and No Pb on external pins. Operating temperature r...
... 2.Isolation @ 60Hz: Input to output:1500Vrms. 3.Comply with RoHS requirements-whole part No Cd, No Hg, No Cr6+, No PBB and PBDE and No Pb on external pins. 4.Operating temperature range: 0℃ to +70℃./ or -40...
...60Hz: Input to output:1500Vrms. 3.Comply with RoHS requirements-whole part No Cd, No Hg, No Cr6+, No PBB and PBDE and No Pb on external pins. 4.Operating temperature range: 0℃ to +70℃./ or -40℃ to +85℃ 5. St...
...60Hz: Input to output:1500Vrms. 3.Comply with RoHS requirements-whole part No Cd, No Hg, No Cr6+, No PBB and PBDE and No Pb on external pins. 4.Operating temperature range: 0℃ to +70℃./ or -40℃ to +85℃ 5. St...
... @ 60Hz: Input to output:1500Vrms. 3.Comply with RoHS requirements-whole part No Cd, No Hg, No Cr6+, No PBB and PBDE and No Pb on external pins. 4.Operating temperature range: 0℃ to +70℃./ or -40℃ to +85℃ 5....
... @ 60Hz: Input to output:1500Vrms. 3.Comply with RoHS requirements-whole part No Cd, No Hg, No Cr6+, No PBB and PBDE and No Pb on external pins. 4.Operating temperature range: 0℃ to +70℃./ or -40℃ to +85℃ 5....
... with requirement of IEEE802.3u standards. 3.RJ 45 connector with 10/100 BASE-TX magnetic. 4.Comply with RoHS requirements-whole part No Cd, No Hg, No Cr6+, No PBB and PBDE and No Pb on external pins. 5.Oper...
... with requirement of IEEE802.3u standards. 3.RJ 45 connector with 10/100 BASE-TX magnetic. 4.Comply with RoHS requirements-whole part No Cd, No Hg, No Cr6+, No PBB and PBDE and No Pb on external pins. 5.Oper...
... with requirement of IEEE802.3u standards. 3.RJ 45 connector with 10/100 BASE-TX magnetic. 4.Comply with RoHS requirements-whole part No Cd, No Hg, No Cr6+, No PBB and PBDE and No Pb on external pins. 5.Oper...