| Sign In | Join Free | My burrillandco.com |
|
...HongCe — a trusted source factory in electrical testing equipment — is designed for evaluating the thermal endurance and safety reliability of plug and socket insulating sleeves under abnormal heat condition...
IEC60884 Figure 28 Bolt Insulation Sleeves Plug Socket Tester For Testing Abrasion Resistance The test apparatus is designed and manufactured according to the standard requirement of IEC884 Figure 28. It is use...
...19, VDE0620, etc. It is suitable for checking the maximum force required to pull the plug out of the socket and the single pole pin pulled out from the socket assembly. Whether the minimum force required is ...
... C figure 1 and figure 2. The gauge in figure 1 is used for verify the interchangeability of plugs, the gauge in figure 2 is used to check the impossibility of plugging one terminal into outlets. Model speci...
IEC60065 Figure 6 Plug Socket Tester Dielectric Tensile Strength Testing Machine With Metal Bar Standard Confirm to IEC60950 Safety of information technology equipment, IEC60065-1 ......
IEC60335 Plug Socket Tester Anti Shock Probe Experimen Device 0-40°C Electrode Output The Testing Voltage AC40-50V Standard This device is designed and manufactured according to the standard of IEC60335, IEC 60...
IEC 60884-1 Fig8 Plug Socket Tester Compression Testing Machine With 2PCS 150N Weights IEC60884-1 Clause 24.5 The specimens are subjected to a compression test as shown in figure 8, the temperature of the press...
IEC60884 Clause 24.4 Testing Device For Checking The Impact Resistance At Low Temperature Test Apparatus Standard: IEC 60884-1 2013 clause 24.4, 30.4, figure 27 and 42, IEC60811-1-4, VDE0620 and so on Applicati...
...Plug Socket Tester 2 Linear Stations 7 Inch Touch Screen IEC60669-1 Independently Control The test machine is designed and manufactured according to IEC60884-1clause 20 and 21 fig 16, IEC60669-1 and etc. It ...
IEC 62196 Vehicle Drive Over Testing Apparatus For Charging Plug Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being ...
Screwed Glands Tester SG-1 Product details: The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5. Screwed glands shall be fitted with a cylindrical metal rod having a diameter...
Screwed Glands Tester Product details: The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5. Screwed glands shall be fitted with a cylindrical metal rod having a diameter equa...
... the wiring status of the socket quickly and accurately. 5. Widely used in the school, laboratory, factory and other social fields. Specifications: Plug standard: US plug Operate voltage: 90- 250V/45 - 65Hz ...
... the wiring status of the socket quickly and accurately. 5. Widely used in the school, laboratory, factory and other social fields. Specifications: Plug standard: US plug Operate voltage: 90- 250V/45 - 65Hz ...
... Plug Socket Tester GOST 7396.1-89 IEC 83-75 Group C Socket Measure Product information: This testing device conforms to GOST 7396.1-89 (IEC 83-75), Group C figure 1 and figure 2. The gauge in figure 1 is us...
... for checking socket of rated current is not bigger than 16A and the voltage is not bigger than 250V. Its principle is to see whether there will be any damage to the socket in the standard sense when the ele...
...Plug and Socket Product information: Some measuring gauges are designed and manufactured by Hongtong Electromechanical Co., Ltd. These measuring gauge confirm to the standard of GB2099.1-2008 clause9,GB1002-...
Clamping Device Test Machine CL-2 Product overview: This testing machine is also called the test apparatus for checking damage degree of wire which confirms to many standards such as IEC884,IEC60947 and so on. ...
...Plug-Socket Endurance Tester SLT-2 Product overview: This device complies with standard terms of 20, 21 in IEC884-1(figure 16) and IEC60669-1 as well as IEC61058-1. It is used for the on-off ability test and...