| Sign In | Join Free | My burrillandco.com |
|
Roof Building Materials Combustion Test Equipment With 7 Inch Effective Display Product introduction The fire reactivity test device of roof material is developed according to the preparation of GB/T 30735-2014...
...Material Fire Performance Testing Equipment for ISO5657-1986 Combustion Test Scope of application: Mainly applicable to building materials with a thickness of no more than 70mm and a substantially flat surfa...
...Combustion Analyzer Flammability Test Panel for Building Materials meet international standards NF P92-505, EU 95/28 / EC, ECE technical specifications and requirements of R118 Annex 7 of these Regulations. ...
...impingement of vertical single-flame source in the principle of German Klein Brenner, For related categories B, C, D, e, Bfl, Cfl, Dfl and Efl in all combustible materials testing, the device provide overall...
... test under specified conditions. Micro-control Building Material Non-Combustibility Testing Equipment meets the test standards of GB/T5464-2010 "Testing methods for non-combustibility of building materials"...
...Combustibility Tester Scope: It is mainly applicable to the test method to determine the combustion performance of building materials under specified conditions. It is applicable to test the combustion perfo...
...Combustibility Tester Scope: It is mainly applicable to the test method to determine the combustion performance of building materials under specified conditions. It is applicable to test the combustion perfo...
...: MEMS combustible gas sensor is using MEMS micro-fabrication hot plate on a Si substrate base, gas-sensitive materials used in the clean air with low conductivity metal oxide semiconductor material. When th...
...Calorimeter / Buliding Materials Burning Calorific Value Tester Application It is for building materials combustion calorific value test. The test method specified in this standard is used to test the absolu...
...Materials Product introduction The sample is placed vertically in a quartz glass cylinder filled with oxygen and nitrogen. The sample is usually ignited from the top and the combustion state of the sample is...
... by oxygen concentration, letting user know minimum oxygen concentration as necessary for combustion. The working principle is: Place the specimen into the testing chimney, filling with oxygen and nitrogen i...
...materials flammability test furnace Scope of application Touch screen control building materials flammability test furnace uses stainless steel box, sample controllable automatic lifting, the lamp can be adv...
...combustion characteristics of building materials and the flame spread rate of exposed surfaces such as walls, ceilings (including solid plastics), and at the same time to measure smoke density. This testing ...
TS-H1150 Nanoporous Thermal-Insulation Blanket Thinner and easy to install High hydrophobic rate (>99.2%) A1 non-combustible ability (complying with GB 8624-2012) Easy for delivery and inventory TS-M750 Nanopor...
TS-H1150 Nanoporous Thermal-Insulation Blanket Thinner and easy to install High hydrophobic rate (>99.2%) A1 non-combustible ability (complying with GB 8624-2012) Easy for delivery and inventory TS-M750 Nanopor...
...Material Smoldering Combustion Test Furnace Ncf BS 8414 Building Material Smoldering Combustion Tester is designed and manufactured in accordance with EN ISO1182 standard , it is mainly for building products...
... testing. NCF ISO1182 Non-combustibility Tester is mainly used in the non-combustibility test for building materials, and is suitable for classification of combustion performance of Class A fireproof materia...
...critical factor that directly impacts the safety and integrity of structures. The Customized Combustibility Testing Equipment for Building Materials Testing is a revolutionary tool that enables architects, e...
...materials. Material Science. Equipment can fully meet the international standards of GB/T 5464 and ISO 1182. Furnace at 750 Non - combustion performance of homogeneous and non - homogeneous building products...
... materials and products specified in EC Decision 2000/147/EC) in the Single Combustion Test (SBI). 2. Comply with the standard: It meets the requirements of GB/T 20284-2006 standard "Monomer Combustion ...