| Sign In | Join Free | My burrillandco.com | 
              
  | 
      
                    ...Common Mode Choke 8 FILES for DC power supply Characteristics Core material: Nickel-Zinc Ferrite High suppression rates of asymmetrical interferences at high and middle frequencies High interference stabilit...
                    ...Common Mode Power Line Choke for emi Characteristics Core material: Nickel-Zinc Ferrite High suppression rates of asymmetrical interferences at high and middle frequencies High interference stability against...
                    ...Common Mode Power Line Choke for Power electronics 7448421016 Characteristics Core material: Nickel-Zinc Ferrite High suppression rates of asymmetrical interferences at high and middle frequencies High inter...
                    ...Common Mode Choke Optimized for burst signals 744842311 Characteristics Core material: Nickel-Zinc Ferrite High suppression rates of asymmetrical interferences at high and middle frequencies High interferenc...
                    ...Common Mode Line Filter For Data and Signal Lines POE Characteristics: Low profile only 2.5 mm High impedance up to 5000 Ω High current up to 700 mA Rated voltage: 80 VDC (42 VAC) Flammability corresponding ...
                    Toroidal Common Mode Choke Coils Filters with High Frequency Low Loss TG-CMC012 Features: Highest common mode impedance over the widest frequency range High saturation flux density Less flux leakage and beat Hi...
                    ...Common Mode Power Line Choke for Compact switched-mode power supplies Characteristics Suppression of common mode noise up to 70 dB Approximate 1% stray inductance for symmetrical interference suppression Hig...
                    Common Mode Choke for Compact switched-mode power supplies 744861250 Characteristics Suppression of common mode noise up to 70 dB Approximate 1% stray inductance for symmetrical interference suppression High is...
                    ...Common mode inductor,surface mount toroidal coils and common mode toroidal choke,25uH to 2500uH FEATURES: High Saturation Material Low EMI Radiation Pick and PLace Higher Frequency Low DC Resistance Operatin...
                    ...Common Mode Choke SMD Inductor Filter ACCM07 Series SIZE LENGTH WIDTH HEIGHT PACKAGE (mm) (mm) (mm) 1614 14.2 16.4 8.9 SMT 2017 17 19.6 9.9 SMT Feature Core material: MnZn High suppression rates of asymmetri...
                    ... electromagnetic interference (EMI) and radio frequency interference (RFI) in circuits. Its core function is to conduct the desired useful signal (differential-mode signal) while effectively attenuating and...
                    ...FILTER SCREW emc Filter for converter Conducted EMI Types Common-mode interference:the interference between phase lines of power lines and ground wires, and between the midline and ground. Common-mode line a...
                    High Frequency Choke , Flat wire inductors , high current common mode chokes Coil , SMD Inductor , SMD Filter FEATURES: L(1-2)=(4-3): 13mH Min @1.0KHz,0.25V DCR(1-2)=(4-3): 170mΩ Max Rated current: 2.0A Max(Tem...
                    UT2020 Filter Coil , Common Mode Choke , Leaded Type RoHS Certification TECHNICAL INFORMATION Max operating voltage:250V at 40 IDC Max: rating AC/DC current A @40 Hi-Pot 1500V AC winding to winding 2S. Insula...
                    High Inductance Toroidal Common Mode Choke Coil Inductor For EMC Filters About this product High-Quality Certification: This product meets international quality standards, as certified by ISO 9001:2008, ROHS st...
                    High Inductance Mn-Zn Toroidal Common Mode Choke Inductance For Power Filters 1.Product Description The Mn-Zn Toroidal Inductor consists mainly of a toroidal core made of manganese-zinc ferrite material and coi...
                    UU 9.8 Common Mode Inductors Signal Switch Frequency Power Supply Chokes Coils Filters Key Specifications/Special Features * Components 1) Ferrite cores 2) 100% Copper wire UEW/PEW enameled wire 3) Shielding .....
                    ...Common Mode Line Filter for Signal and sensor lines Characteristics Low profile only 2.5 mm High impedance up to 5000 Ω High current up to 700 mA Rated voltage: 80 VDC (42 VAC) Flammability corresponding to ...
                    ...Common Mode Choke Description: Manufacturer: Shareway Product Category: Common Mode Chokes / Filters Termination Style: SMD/SMT Inductance: 5 uH Impedance: 500 Ohms Tolerance: 25 % Maximum DC Current: 5 A Ma...
                    ...Common Mode Power Line Choke Suppression for common mode noise Characteristics: Very high permeability nanocrystalline core material Improved isolation through plastic case and winding spacer High and stable...