| Sign In | Join Free | My burrillandco.com |
|
... where protection against lightning strikes and power surges is required. The features and design of these surge protectors makes them the perfect compliment to ensure your home is protected against power su...
... protection level (Up). It is characterized by its capacity to safely discharge current with 8/20 µs wave form. Type 2 surge arrester: Protects against overvoltage triggered by electrical switching operation...
... of protection. • Thermal plastic UL94-V0. • Compliant with IEC 61643-11 Class III and EN 61643-11 Type 3. Product Details: ......
...surge protective device( hereinafter referred to as SPD) are suitable for AC 50/60Hz, IT, TT, TN-C, TN-S, TN-C-S and other power supply system. • High discharge capacity and low residual voltage • It protect...
50kA Single Phase 1+1 Type 1 Class I Lightning Surge Protective Device lightning absorber Product Features: 1. Inside over-current and over-heat protection, temperature control open circuit. 2. Module design, c...
Type 1 Surge Protection Device 25kA AC low-voltage arrester device low-voltage arrester Product Description: Protection class: Type 1, Class I Pole number: 2P Max. continuous operating voltage (Uc) (AC): 150V /...
...Surge Protection device Type 1+2 with lightning protection class 3+4 Technical Parameters Model: Maximum continuous voltage AC Uc V 275/320/385/440 SPD to EN 61643-11 Type 1+2 SPD to IEC 61643-1 class I+II L...
.... continuous operating d.c. voltage Uc 300V Nominal discharge current (8/20us) In 3kA Combined impulse Uoc 6kV Voltage protection level Up ≤1200V Response time tA ≤25ns Operating temperature range Tu -40℃—80...
...Pluggable SPD 3P+1 Series Class II surge protection device Uc385V Features Capability to clamp and withstand high-energy transients Pluggable modules Thermal protection IP20 protection rating Technical Param...
Rack type network surge protective device can protect 24 network cables Model: Trss-rj11 / 45 colour:white Authentication: CE ECM Product introduction The TRSS-RJ45/8 type network lightning arrester is used to ...
... frequency signal receiving and sending systems. Connected in series in the antenna to prevent surges from intruding into the equipment along the feeder and causing damage. The selection of the antenna feede...
...Surge Protection Device 100KA / IEC61643-1 OBV10-I-15 Surge protectors OBV10-I-15 meet the type 1 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from overvolt...
...Surge Protection Device With Short Response Time OBV10-I-15 Surge protectors OBV10-I-15 meet the type 1 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from ov...
...Surge Protection Device 100kA Power SPD OBV10-I-15 Surge protectors OBV10-I-15 meet the type 1 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from overvoltage...
...Surge Protection The surge arrestors OBV1-C40 meet the type 2 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from overvoltages of all types and are available ...
...Solar Surge Protective Device Prewired modular complete unit for use in photovoltaic systems consisting of a base part and plug-in protection modules Combined disconnection and short-circuiting device with s...
.... continuous operating d.c. voltage Uc 300V Nominal discharge current (8/20us) In 3kA Combined impulse Uoc 6kV Voltage protection level Up ≤1200V Response time tA ≤25ns Operating temperature range Tu -40℃—80...
Surge Protection Device For Intelligent Road LED Lighting for Low-voltage distribution system Lightning protection LED Surge Protection Device SPD classification according to EN61643-11 Type 3 SPD classificatio...
Single Phase Water Resistant Outdoor Application, 230V Series Connection Led Surge Protection Device Lightning protection LED Surge Protection Device SPD classification according to EN61643-11 Type 3 SPD classi...
Ac Spd 385v Surge Protection Device HDS-B Series surge protective device (SPD) is designed to protect AC 50/60 HZ and 0-380 V power supply systems (such as TN-S, TN-C-S, TT, IT,etc.) The lightning stroke equipo...