| Sign In | Join Free | My burrillandco.com |
|
...-off shelf 1 set 2. HXE-24DS Fine copper wire drawing machine 1 set 3. Bobbin Unloading device 1 set 4. Spare parts As per List 5. Operation manual III. Specifications 1. Inlet size: 0.5mm-1.0mm 2. ......
... single bare copper wire from 1.8mm to 0.3mm-0.7mm. II. Main Technical parameters 1. Usage: Copper wire drawing and annealing 2. Inlet diameter: 1.8mm 3. Outlet diameter: 0.3mm-0.7mm 4. Max. mechanical speed...
...Fine copper wire drawing machine with annealer I. Application HXE-24DWT Fine copper wire drawing machine with annealer is used to draw and anneal single bare copper wire from 0.8mm-1.6mm to 0.1mm-0.6mm. II. ...
...Copper Wire Tinning Machine 68Kw 300 Pay Off Bobbin Quick detail: FC-T40-1 normal wire high speed annealing machine Characteristics: Easy to operate, good annealing heat preservation, save electricity, achie...
...Copper Wire Annealing Machine Sky Blue With Water Seal Protection Quick detail: FC-T40-2 normal wire high speed annealing machine Characteristics: Easy to operate, good annealing heat preservation, save elec...
... Dry copper recycling machine is a professional production line for dry separation of waste wire and cable. For example, circuit lines, communication cables, and wire strippers are not suitable for processin...
...communication cables and other types of miscellaneous wires and cables. 2) This machine has a compact structure, and has stable and reliable performance. 3) Scrap copper wires and cables are chopped by the C...
...communication cables and other types of miscellaneous wires and cables. 2) This machine has a compact structure, and has stable and reliable performance. 3) Scrap copper wires and cables are chopped by the C...
...Copper Wire Pulling Machine Introduction Control mode 1. To realize the speed control of wire drawing and wire take-up, the speed signal must be measured first. The linear speed of the constant speed wheel r...
... the die hole under the action of a certain tension to make the plastic deformation of the wire rod, reduce the section and increase the length. It is a kind of cold deformation. characteristic ① The drawn w...
...PV ribbon copper wire drawing machine Inlet-0.6-1.4mm,outlet 0.1-0.4mm Four wires MBB round PV ribbon wire annealing and tinning machine 1.Structural characteristics and performance parameters: 1. Structural...
...copper wire drawing machine 14DS Fine copper wire drawing machine is used to drawing copper wire from 0.8mm-1.6mm to 0.25mm-0.6mm. I. Specifications 1. Inlet wire diameter: 0.8mm-1.6mm. Outlet wire diameter:...
... wire diameter: 0.15mm-0.4mm 2. Outlet wire diameter: 0.03mm-0.08mm 3. Speed: 1800mpm, for 0.05mm, speed 1500m/min, capacity 1.563kg per hour. 4. Dies number: 24 5. Slip ratio of machine: 1st -23rd 10.5%, 24...
...Copper Wire Drawing Machine From Reliable Manufacturer Features of copper wire drawing machine Copper wire drawing machines offer various features that enhance their performance and efficiency in the wire dr...