| Sign In | Join Free | My burrillandco.com |
|
... BB. It is used to test the Durability Test and Close time Test for the lower guard. The saw is to be set for a 90°cut and oriented in the horizontal plane. The lower guard is to be cycled from the full clos...
IEC60695-11 Vertical And Horizontal Flammability Testing Equipment Flame Test Product information: The series of horizontal-vertical flame test apparatus are designed and manufactured according to the standard ...
...Test Equipment Support For Testing Product information: 1 pressure vessel: stainless steel tank, diameter 0.8 meter, height 1 meter. 2 pressure adjustment range: 0 ~ 5bar (can be customized). 3 pressure syst...
...Testing Equipment IPX9K Test Chmber For Electrical And Auto Parts Products Introduction: The test apparatus is designed and manufactured according to clause 14.2.9 of IEC EN 60529 2013 Edition 2.2 , DIN40050...
.... Application This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and el...
...Testing Equipment for Automotive AC Compressor The automatic helium leak vacuum chamber detection system is suitable for automotive air-conditioning compressor air-tightness testing, but also suitable for te...
... of protection provided by enclosures (IP Code)>>, used To Test Waterproof Performance of the electrical products which second characteristic is numeral 5/6. This machine is suitable for enclosure protection...
...Test Apparatus Touch Screen Operation IEC60695 Flammability Test Equipment Products Introduction This device is manufactured according to the standard of IEC60695-2-10, IEC60695-2-13. It also conforms to the...
...Waterproof Degrees Test Equipment Standard:IEC60529 degree of protection provided by enclosures (IP Code) of the IPX1 and IPX2, IEC60884-1, IEC60335-1, IEC60598-1. Application:It is used for the testing of I...
...Test Equipment salt spray testing machine 2000x800x600mm Application: The salt spray test machine is used for the surface treatment of various materials, including coatings, electroplating, organic and inorg...
...: 13.2 Test conditions for first characteristic numerals 1 , 2, 3, 4 The object probe is pushed against any openings of the enclosure with the force specified in table 7. 13.3 Acceptance conditions for first...
... as specified in 1 4.2.1 adjusted to provide the water flow rate specified in table 8. The table on which the enclosure is placed does not turn as in the case of the test for the second characteristic numera...
...Test Product information This battery forced internal short-circuit tester is an integral testing equipment to performance a comprehensive test for temperature, voltage, internal-short circuit, which is appl...
IEC 60227-1 Cable Testing Equipment Bending Test Apparatus With 60 Per Minute Flexing Rate IEC60227-2 clause 3.2 Bending test: The requirements are given in 5.6.3.2 of IEC 60227-1. A sample of cord of appropria...
... 60745-2-5 Figure 110 IEC Test Equipment Test Probe B With 12mm Diameter IEC60745-2-5 clause 19.101.2.4 For checking the accessibility of the cutting edge zone at the front of the saw above the guide plate, ...
...Test Equipment, 500L Water Tank Nowadays, there are more and more electronic products used outdoors, and waterproof test is a very important link for products, because only after waterproof test can we have...
... – Part 1: General requirements; Uses: The switch of fixed electrical devices for household and similar purposes is used for on-off capacity and normal operating life test, and...
IEC60335-2-9 Home Appliance Testing Equipment Aluminum Vessel for Drop Test Vessel For Drop Test procedure: The vessel uniformly filled with at least 1,3 kg of sand or shot so that the total mass is 1,80 kg 0...
..., IEC60884-1, IEC60335-1, IEC60598-1. Application:Primarily utilized for IPX7 testing, it further facilitates automated water and electrical control during IPX1 to IPX6 waterproof evaluations. Test sample:Th...
IEC60335-2-9 Base Flat Diameter 120mm10mm Home Appliance Testing Equipment Aluminum Vessel for Drop Test Vessel For Drop Test procedure: The vessel uniformly filled with at least 1,3 kg of sand or shot so that...