| Sign In | Join Free | My burrillandco.com |
|
... consumption, and is ideal for use in industrial, automotive, and medical applications. Features: • Low noise: 0.3 μVrms (max) • High CMRR: 90 dB (min) • High slew rate: 0.7 V/μs (min) •...
... bias current: 20 pA • Differential input voltage range: ±12 V • High common-mode rejection ratio: 80 dB • Output short-circuit protection • Package: Q1 (3 mm × 3 mm) •...
...-REEL7 Amplifier IC Chip Description: The AD797ARZ-REEL7 is an amplifier IC chip designed for use in audio and instrumentation applications. It features a low noise figure of 2.2 nV/√Hz and a wide bandwidth ...
...Amplifier IC Chips Description: The AD8672ARMZ-REEL is an operational amplifier IC chip designed for precision low noise and low power applications. It has a wide bandwidth, low distortion and low power cons...
... output power of 1W @ 5V -Low noise of -90 dBV -High input impedance of 1MΩ -High gain of 43 dB -High slew rate of 8 V/µs -Wide temperature range of -40°C to +85°C Applications:...
...Amplifier IC Chips Features: • Dual, rail-to-rail output amplifiers with independent shutdown and gain setting • Fully differential inputs • Low quiescent current • Low input bias currents • Output swing to ...
...Amplifier Features: • Low Supply Current: 25 μA/amplifier • Wide Gain Bandwidth: 2.7 MHz • Low Distortion: 0.0006 % • High Slew Rate: 15 V/μs • Low Input Offset Voltage: 500 μV • High Output Swing: ±5.5 V • ...
..., such as audio systems, consumer electronics, and automotive audio. Features: • Low distortion: 0.015% typ. @ 1.2 Vrms, 1 kHz • Low noise: -90 dB typ. • Low power consumption:...
...Amplifier IC Chips Product Features: - High-speed precision operational amplifier - Low input offset voltage: 5 μV max - Low input bias current: 1 pA max - Wide bandwidth: 10 MHz - High slew rate: 10 V/μs - ...
...04% @ 1 kHz - High signal-to-noise ratio: 95 dB - Low quiescent current: 0.5 mA - Shutdown mode: 0.1 μA - High efficiency: 80% - Thermal protection - Stereo/Mono selection - Differential inputs - SOIC-8 pack...
...% -Output Current: 32mA -Shutdown Mode: 0.1µA -High PSRR: 70dB -Package: 8-Pin VSSOP Product Status Active Amplifier Type CMOS Number of Circuits 1 Output Type Rail-to-Rail Slew Rate 6.5V/µs Gain Bandwidth P...
...Amplifier IC Chips Features: • Dual, rail-to-rail output amplifiers with independent shutdown and gain setting • Fully differential inputs • Low quiescent current • Low input bias currents • Output swing to ...
...: 50 pA (Typical) • High Gain Bandwidth: 10 MHz (Typical) • High Common-Mode Rejection Ratio: 90 dB (Typical) • High Output Voltage Swing: ±13 V (Typical) Package: • 8...
...: 140 dB • Low Noise: 15 nV/√Hz at 1 kHz • Rail-to-Rail Input and Output • Differential Input Voltage Range to Supply Rail • Wide Bandwidth: 2.5-MHz GBW • Low Quiescent Current: 140 µA per Amplifier (typical...
...Amplifier AD620 FEATURES Easy to use Gain set with one external resistor (Gain range 1 to 10,000) Wide power supply range (±2.3 V to ±18 V) Higher performance than 3 op amp IA designs Available in 8-lead DIP...
...Amplifier AD8042 FEATURES • Single AD8041 and Quad AD8044 also Available • Fully Specified at +3 V, +5 V, and 65 V Supplies • Output Swings to Within 30 mV of Either Rail • Input Voltage Range Extends 200 mV...
... (within 20 mV of supply rail, 100 kΩ load) ♦ Guaranteed 3V, 5V and 15V Performance ♦ Excellent CMRR and PSRR: 82 dB ♦ Ultra Low Input Current:...
... Display Product Specifications Product Name: Audio Amplifier Board Supply Voltage: DC 12-26V (Recommended DC 24V) Output Power: 80W × 2 + 100W (Subwoofer) Output Load: 4-8Ω Frequency Response Range: 14-100K...
...amplifier Amplifiers Description The module is designed for both military and commercial applications. The latest device technologies and design methods are employed to offer high power density, efficiency, ...
... applications. It provides 50W of output power, meeting the high power requirements of applications such as satellite communications and radar systems. Additionally, with a 47 dB power gain,...