| Sign In | Join Free | My burrillandco.com |
|
...wires and cables - Scraping test method for extruded outer sleeves". Scope of application: Suitable for the scratch and abrasion resistance test of 30mm~80mm plastic outer jackets of cables. It is a pro...
... and outside layer, lining or underlayer of the footware or the similar fabric. Testing the samples as per the standard, test can be classified as dry test and wet test. And test the samples Lissajous-orient...
... test of textile and outside layer, lining or underlayer of the footware or the similar fabric. Testing the samples as per the standard, test can be classified as dry test and wet test. And test the samples ...
...Testing Machine , Leather Footwear Martindale Abrasion Testing Equipment Feature Leather footwear martindale abrasion testing machine mainly applies to the resistance test of textile and outside layer, linin...
...Test Equipment For UN38.3 Tests PCB Board Level Test, JEDEC Test Introduction shock test system is mainly used for shock test of Batteries , electronic components and devices with large mass to verify their ...
...Test Room LED Light Thermal Durability Testing Equipment Overview: The luminaire durability aging test room meets the requirements of Section 12.3 of the Chapter 12 “Endurance Test” and Annex K “Temperature ...
...Testing Equipment 50KV/5KVA Isolated Glove(boot & blanket) Test System 1) Testing insulation glove & boot 2) Can test six glove & boot at the same time 3) Testing insulation stick & blanket by adding test fr...
...Testing Equipment 50KV/5KVA Isolated Glove(boot & blanket) Test System 1) Testing insulation glove & boot 2) Can test six glove & boot at the same time 3) Testing insulation stick & blanket by adding test fr...
Truck Transport Vehicle Rain Test System Electric Vehicle Testing Equipment System Purpose The test purpose of this test system is mainly the ability of the product to prevent rainwater penetration and the rain...
... Testing Equipment Dust-proof Test Chamber Complied Standards & Clauses This test chamber complies with IEC60529-2013, EN60529, DIN40050, SAEJ575 and etc. Technical Parameters 1. Inner space size: width 1500...
...: used to simulate the extrusion of various types of batteries when they are used, transported, stored or processed as household waste. Test principle: place the battery between two plates and apply a squeez...
...IP5X and IP6X, IEC60598-1-2008, IEC60335-1 Clause 22.1 and etc. Product Overview The test chamber is specifically designed to evaluate the dust and sand resistance performance of sealed components and enclos...
...Test Equipment Salt Fog Test System for Automotive Components Complied Standards & Clauses This test chamber meets the requirements of ES 5454, GJB150A, ASTM B117, ASTM B368, ASTM B380, ASTM D1735, ASTM D224...
...Testing Equipment Car Rainproof Sealing Test Chamber Complied Standards & Clauses Conforms to IEC 60529 Degrees of protection provided by enclosures (IP Code); Product Overview This automotive rain test cham...
...(IP Code)> IPX3,IPX4, IPX5 and IPX6 test, figures 5 and figure 6. Product Overview The IPX3–IPX6 Waterproof Test Chamber is specially designed to evaluate the water resistance performance of products under s...
...test equipment Description: 1. The meter testing system supports automatic, semi-automatic, and manual operations for testing mechanical meters, electronic-mechanical meters, and electronic meters. 2. Testin...
... smart meter testing solution designed for utility companies, meter manufacturers, and calibration labs. Key Features and Specifications: Test Capacity: Supports testing of up to 3 meters simultaneously. Acc...
....2 clause 22.7. It is used for checking mechanical strength of completed flexible cables. This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 4mm2and cables ha...
IEC60558-1 Fig 6 Mandrel Tester Device Light Testing Equipment Product information This tester conforms to IEC60558-1 Fig6 and IEC60065 Fig14--16. The test shall be performed by fixing the specimens of thin she...
... and toughened glass, providing low humidity seal working space, which is an ideal integration device in the process of lithium electric production and test. Brief parameters and configuration: Single -...