| Sign In | Join Free | My burrillandco.com |
|
... Feature Electric drive Weight 87kg Volume 91×55×99cm Test standard JIS-C-3005 2.Equipment Description: The cable ball pressure test chamber is used to testing pressure resistance property under high tempera...
...Testing Equipment is a comprehensive testing device for detecting the properties of diesel fuel, including range from room temperature to 370℃, relative humidity ≤65%, power consumption 1000W, LED display mo...
...Testing Equipment Non- Combustibility Tester Scope: It is mainly applicable to the test method to determine the combustion performance of building materials under specified conditions. It is applicable to te...
...Testing Equipment Non- Combustibility Tester Scope: It is mainly applicable to the test method to determine the combustion performance of building materials under specified conditions. It is applicable to te...
...Burning Test Device Instrument Introduction: The UL 1685 Wire and Cable Flame Test Apparatus is an instrument used to evaluate the ability of a single or bundled cable to inhibit flame propagation under spec...
...testing equipment for fireproof building materials Executive standard: in line with GB/T8626-2007 "Test Methods for Flammability of Building Materials’ GB/T10801.2-2002"Extruded Polystyrene foam fo...
...Testing Equipment Conform to the standard: in accordance with GB/T18380.31-2008, IEC60332-3-10-2018 "Combustion Test of Cables and Optical Cables under Flame Conditions Part 31: Vertically Installed Bun...
...Testing Machine Remark : The IEC 62730 standard is an international standard for multi stress aging testing of insulators used in photovoltaic (PV) systems, primarily evaluating the long-term durability of i...
...water test Appliance: Spray Nozzle to prove the degrees of protection IPX3 and IPX4 is a hand-held test device to verify protection against spraying and splashing water. The water pressure can be adjusted us...
... Curtain Walls, Doors and Windows" 【Product Overview】 This device is a performance testing equipment designed and developed in accordance with the new standard "Classification and Detection Method ...
ASTM E1886 ASTME1996 Standard Testing Machine For Testing Windows Or Doors [Product overview]: The device is designed and developed in accordance with the new standard classification and testing method of wind ...
... bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is suitable for circular wire and cab...
... test of 10kV/2500kVA main transformer, capacitance ≤0.01uF, test frequency 45-65Hz, test voltage not exceeding 28kV, test time 1min. 3. AC withstand voltage test of 10kV switch, busbar and other substation ...
... test of 10kV/2500kVA main transformer, capacitance ≤0.01uF, test frequency 45-65Hz, test voltage not exceeding 28kV, test time 1min. 3. AC withstand voltage test of 10kV switch, busbar and other substation ...
...Device 11 Rigid Test Finger Probe Products information: This rigid finger probe conforms to the standard requirement of IEC61032 figure 7 device 11,IEC60884,IEC60598,IEC60335,IEC60065. It is used to verify t...
... with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with the energized part of the electrical appliance and the high potent...
...Test Equipment Temperature Rise Tester With Digital Meter Product informaton: This device is in accordance with IEC60884-1 Fig 44 Clause 19 of the temperature rise to design and manufacture, it is mainly use...
...Testing Equipment Tensile And Elongation Strength Measuring Device 390mm Application: this device is suitable for all kinds of food packaging, textile, rubber, plastic, synthetic leather, tape, electronics, ...
...Device for Impact Energy Verification | IEC 60068-2-75 Impact Testing Machine Calibration System Product Overview The Spring Impact Hammer Calibration Device is a precision verification system designed for m...
... 4.14.3. The adjustment device, equipped with the appropriate cable or cord shall be operated in accordance with following table. A cycle of operation is a movement from one extreme of the range to the other...