Home > Chemicals > Inorganic Chemicals > Fiberglass Products >

Dielectric Constant Ptfe

Fair Trading Service

Report fraud supplier Report IPR Products

Haven't found right suppliers
Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
And this service is free of charge.
we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!

Submit Buying Request

Total 1704 products for dielectric constant ptfe Manufacture & Suppliers

Non Toxic PTFE Coated Fiberglass Fabric High Dielectric Strength

...PTFE Coated Fiberglass Fabric High Dielectric Strength PTFE Fiberglass Fabric Basic fabric named fiberglass fabric use best imported Fiberglass yarn as the weaving material to plain knit or specially knit in...

Unionfull (Insulation) Group Ltd.
Zhejiang,China

Verified Supplier

Add to cart
Rogers PCB IsoClad 917 Non Woven Fiberglass / PTFE Materials High Frequency Circuit

... Introduction Rogers IsoClad 917 laminates are non-woven fiberglass/PTFE composites using a low ratio of fiberglass/PTFE to achieve the lowest 2.17 or 2.20 dielectric constant and 0.0013 dissipation factor. ...

Bicheng Electronics Technology Co., Ltd
Guangdong,China

Verified Supplier

Add to cart
Rogers DiClad 870 Woven Fiberglass Microwave PCB 125mil Reinforced PTFE Based

...PTFE-based 31mil 93mil 125mil Microwave PCB (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) General Description DiClad 870 laminates are woven fiber...

Bicheng Electronics Technology Co., Ltd
Guangdong,China

Verified Supplier

Add to cart
TLX-0 PTFE material low DK 2.45 TLX-0 2-Layer high frequency PCB built on 20mil laminate with HASL Finish

... composites, this PCB offers excellent mechanical and thermal properties, low dielectric loss, and tight dielectric constant tolerances. The HASL (Hot Air Solder Leveling) surface finish ensures excellent so...

Shenzhen Bicheng Electronics Technology Co., Ltd
Guangdong,China

Site Member

Add to cart
Double-Side Taconic PCB/PTFE/ High Frequency Board RF Technology Electronics

...PTFE/ High Frequency Board RF Technology Electronics Quick detail: Origin:China Special: Taconic material Layer:2 Thickness:1.6mm Surface: Immersion Silver Hole:0.8 TACONIC company is the world's largest pro...

Shenzhen Xinchenger Electronic Co.,Ltd
Guangdong,China

Site Member

Add to cart
Double Side Taconic PCB / PTFE / RF Microwave Power Technology

...PTFE/ RF And Microwave Power Technology Quick detail: Origin:China Special: Taconic material Layer:2 Thickness:1.6mm Surface: Immersion Silver Hole:0.8 TACONIC company is the world's largest production of PT...

Shenzhen Xinchenger Electronic Co.,Ltd
Guangdong,China

Site Member

Add to cart
High Frequency Multilayer Rigid PCB RT / Duroid 5880 Laminates 0.254 Stable Dielectric

...Dielectric Quick Detail : 1. Type : Pcb 2. Material : Rogers 3. Layer : Multilayer 4. Products Size :11*9cm 5. Permittivity : 2.5 6. Surface finish : Immersion Gold Features: RT/duroid® 5880 high frequency l...

Shenzhen Xinchenger Electronic Co.,Ltd
Guangdong,China

Site Member

Add to cart
F4BTM and F4BTME share the same dielectric layer but use different copper foils

..., and PTFE resin, followed by strict pressing processes. They are based on the F4BM dielectric layer, with the addition of high dielectric and low loss nano-level ceramics, resulting in higher dielectric con...

Shenzhen Bicheng Electronics Technology Co., Ltd
Guangdong,China

Site Member

Add to cart
Constant Dielectric Loss Tester Dielectric Permittivity Conductivity Test Machine Differential Scanning Calorimeter

Constant Dielectric Loss Tester Dielectric Permittivity Conductivity Test Machine Differential Scanning Calorimeter Dielectric Constant Dielectric Loss Tester Dielectric Permittivity Conductivity Test Machine 1...

DONGGUAN LONROY EQUIPMENT CO LTD
Guangdong,China

Verified Supplier

Add to cart
High Frequency PCB Built on Rogers IsoClad 917 non-woven fiberglass/PTFE Materials

... Introduction Rogers IsoClad 917 laminates are non-woven fiberglass/PTFE composites using a low ratio of fiberglass/PTFE to achieve the lowest 2.17 or 2.20 dielectric constant and 0.0013 dissipation factor. ...

Shenzhen Bicheng Electronics Technology Co., Ltd
Guangdong,China

Site Member

Add to cart
Rogers DiClad 870 PCB Woven Fiberglass Reinforced PTFE-based 31mil 93mil 125mil Microwave PCB

...PTFE-based 31mil 93mil 125mil Microwave PCB (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) General Description DiClad 870 laminates are woven fiber...

Shenzhen Bicheng Electronics Technology Co., Ltd
Guangdong,China

Site Member

Add to cart
100% Virgin PTFE Gasket Tape with FDA Grade and Chemical Resistant Properties for High Temperature Applications

...PTFE unsintered tape , PTFE high temperature thread tape Description: PTFE resin is first molded into work-blank and then skived. The PTFE resin skived sheet tape are highly dielectric. Chemical resistant an...

SANHE 3A RUBBER & PLASTIC CO., LTD.
Hebei,China

Verified Supplier

Add to cart
Density 2.13-2.20 pure PTFE PTFE parts with 19.2 KV/mm Dielectric Strength

...230 Description: PTFE is an engineering plastic with high comprehensive performance which other plastics can not be compared. The advantages of ptfe filling machined parts as below: 1. The ptfe filling machi...

Ningbo XiaYi Electromechanical Technology Co.,Ltd.
Zhejiang,China

Verified Supplier

Add to cart
AD1000 Printed RF PCB Board Arlon PTFE Ceramic Filled High Frequency

... are just for reference) Brief Introduction AD1000 is a high dielectric constant (10.2 or greater) high frequency material, a woven glass reinforced laminate. It permits circuit miniaturization, compared to ...

Bicheng Electronics Technology Co., Ltd
Guangdong,China

Verified Supplier

Add to cart
F4B PCB PTFE Based High Frequency Material 0.17mm 0.25mm 0.5mm 0.8mm 1.0mm

... frequency materials based on PTFE, originating from China. It offers cost and quality advantages for various applications including navigation, radar, satellite communication, 4G and 5G communications. The ...

Bicheng Electronics Technology Co., Ltd
Guangdong,China

Verified Supplier

Add to cart
20mil IsoClad 917 Substrates High Frequency PCB Non Woven Fiberglass / PTFE Composites

.... These laminates are composed of non-woven fiberglass and PTFE composites in a low ratio, allowing them to achieve the lowest dielectric constant and dissipation factor in their class. The non-woven fibergl...

Bicheng Electronics Technology Co., Ltd
Guangdong,China

Verified Supplier

Add to cart
0.8mm AD255C 2-Layer Rigid RF PCB Board PTFE Based With Immersion Tin

...PTFE Antenna Grade Laminates, ensuring unparalleled reliability and functionality. With a dielectric constant of 2.55 and a tight tolerance at 10 GHz/23°C, this PCB guarantees optimal signal integrity and st...

Bicheng Electronics Technology Co., Ltd
Guangdong,China

Verified Supplier

Add to cart
PTFE Composite Material High Frequency PCB Board DiClad 527

... a higher proportion of fiberglass reinforcement compared to PTFE content. This carefully balanced ratio results in a wider range of dielectric constant (Dk) and improved dimensional stability and registrati...

Bicheng Electronics Technology Co., Ltd
Guangdong,China

Verified Supplier

Add to cart

|< << 6 7 8 9 10 11 12 13 14 >> >|

Inquiry Cart 0

All Categories

Dielectric Constant Ptfe

Total 1704 products for dielectric constant ptfe Manufacture & Suppliers

Non Toxic PTFE Coated Fiberglass Fabric High Dielectric Strength

Rogers PCB IsoClad 917 Non Woven Fiberglass / PTFE Materials High Frequency Circuit

Rogers DiClad 870 Woven Fiberglass Microwave PCB 125mil Reinforced PTFE Based

TLX-0 PTFE material low DK 2.45 TLX-0 2-Layer high frequency PCB built on 20mil laminate with HASL Finish

Double-Side Taconic PCB/PTFE/ High Frequency Board RF Technology Electronics

Double Side Taconic PCB / PTFE / RF Microwave Power Technology

High Frequency Multilayer Rigid PCB RT / Duroid 5880 Laminates 0.254 Stable Dielectric

F4BTM and F4BTME share the same dielectric layer but use different copper foils

Constant Dielectric Loss Tester Dielectric Permittivity Conductivity Test Machine Differential Scanning Calorimeter

High Frequency PCB Built on Rogers IsoClad 917 non-woven fiberglass/PTFE Materials

Rogers DiClad 870 PCB Woven Fiberglass Reinforced PTFE-based 31mil 93mil 125mil Microwave PCB

100% Virgin PTFE Gasket Tape with FDA Grade and Chemical Resistant Properties for High Temperature Applications

Density 2.13-2.20 pure PTFE PTFE parts with 19.2 KV/mm Dielectric Strength

AD1000 Printed RF PCB Board Arlon PTFE Ceramic Filled High Frequency

F4B PCB PTFE Based High Frequency Material 0.17mm 0.25mm 0.5mm 0.8mm 1.0mm

20mil IsoClad 917 Substrates High Frequency PCB Non Woven Fiberglass / PTFE Composites

0.8mm AD255C 2-Layer Rigid RF PCB Board PTFE Based With Immersion Tin

PTFE Composite Material High Frequency PCB Board DiClad 527