| Sign In | Join Free | My burrillandco.com |
|
... of Thermal Insulation Materials" relevant standards Non-equivalent: ASTM C411-82 "Test Method for Hot Surface Performance of Highest Temperature Thermal Insulation Materials" ASTM C447-85 &qu...
...tested and classified using a new test method called the Single Burning Item (the SBI) EN 13823. The construction products directive of the European commission will require that all European Member states ev...
...Testing Machine Engineering Fiber Tensile Strength Instrument 1.Product Introduction The GA-X1 Fiber Vibration Linear Density Tester conforms to international fiber inspection standards. The vibration method...
...Tester Test Machine Fiber Fineness Meter 1.Product Introduction The GA-X1 Fiber Vibration Linear Density Tester conforms to international fiber inspection standards. The vibration method for measuring fiber ...
...Test Apparatus For Cables ≤Ø 12.5mm IEC60811-1-4 Clause 8.1 And 8.2 Product description: This device is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables...
... and flame propagation rate of exposed surfaces such as walls and ceilings (including solid plastics), at the same time measure smoke density. This test method applies to the exposed surface which includes c...
... five finger scraping, hundred-grid scraping, and plastic scraping finger scraping methods, which are three common testing methods in the automotive industry. It is suitable for various automotive interior m...
...exposed surfaces such as walls and ceilings (including solid plastics), at the same time measure smoke density. This test method applies to the exposed surface which includes ceiling or walls, provided that ...
... Closed-Cup Flash Point Tester for Oil Testing is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup method and ASTM D93 Standard Test Methods f...
...Pore Size Test Machine Scope of Application This instrument is applicable to the test method for determining the effective aperture of geotextiles and composite geotextiles and other geosynthetic materials u...
...Testing Equipment is designed and manufactured according to the requirements specified in the People's Republic of China standard GB/T 260 "Determination of Water in Petroleum Products". It is ...
...methods, to determine their ability to withstand compression without yielding or loosening over time. It is applicable to non-rigid plastics and determines their ability to return to their original size over...
... Carbon black content test device is designed and produced in line with GB/T2951.41—2008
...Test flames-Needle-flame test method-Apparatus, confirmatory test arrangement and guidance Application: This part of IEC60695 specifies a needle-flame test to simulate the effect of a samll flame which may r...
.../750 V-Part 1: General requirements clause 5.6.3.1, IEC60245-2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods clause 3.1 Figure 1, IEC60065-1 clause 16.3 b) Standar...
... on to the blade shall cover at least the smallest recommended blade-cutting edge zone. The space between the upper guard and the blade shall be designed such that the test probe 'a' of Figure 105 when...
...Test Method for Flash Point and Fire Point of Petroleum Products - Cleveland Open Cup Method, ASTM D92 and ISO 2592. It is applies to determine the flash point and fire point of petroleum products which the ...
...Test Machine HDX1307 Standard:IEC60811-1-4 clause 8.1 and 8.2, common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for general application-Test at low t...
... for general application-Test at low temperature. Application:It is used to test at low temperature for insulating and sheathing materials of electric cables. Test sample:Rubber, insulating and sheathing mat...
...Test Chamber 20%-98%RH Led high and low temperature test room use: Test the heat, cold, dry and moisture resistance of various materials. Suitable for electronics, electrical appliances, food, vehicles, meta...