| Sign In | Join Free | My burrillandco.com |
|
... 0~20A(sampling resistor 100Ω) linearity 0.2%(5%dot~120%dot) application current and power measurement isolation voltage 2000V Encapsulation Epoxy installation PCB mounting(Pin length>3mm) operating temperat...
HEL K Type Metal Oxide Varistor 7D471K 7mm 470V 1200A 31J 90pF For Energy Saving Lamp Features Of The Metal Oxide Varistor 7D471K Small size, large flow capacity and energy tolerance Epoxy resin insulation ...
1 Circuit Through Hole Disc Varistor HEL 10D471K 10mm 470V Imax 2.5KA S300K10 471KD10 Features Of The Disc Varistor HEL 10D471K Small size, large flow capacity and energy tolerance Epoxy resin insulation en...
...size, large flow capacity and energy tolerance ◆ Epoxy resin insulation encapsulation ◆ Response time: <25ns ◆ Ambient temperature: -40℃~+85℃ ◆ Insulation resistance: ≥500MΩ ◆ Varistor voltage temperature coefficient: -0.5%/℃ ◆ Chip ......
...e people call it longevity lamp, which means a lamp that will never go out. The solid cold light source is encapsulated with epoxy resin, and there is no loose part in the lamp body. There are no disadvantag...
...: The item is one miniature medical temperature sensor NTC thermistor. The miniature medical temperature sensors are encapsulated with epoxy in polyimide tubes OD 0.3mm&OD0.6&OD1.0. It takes the enamelled wi...
... temperature measurement. The probe is epoxy resin encapsulated and metal disk, 2 pin aviation plug, or customized connector according to the customer’s requirement. The nominal resistance value is 2.252KΩ o...
... chip is soldered, it is encapsulated with a polyimide tube with an outer diameter of Maxφ0.5. The inside of the sleeve is filled with epoxy resin, and the outer diameter of the lead is OD0.12*2. enamelled w...
... XLPE 150℃ irradiated wire, and the resistance parameters are generally 50KΩ, B25/50=3950K (can also be customized according to customer requirements). It is encapsulated with epoxy...
...°C irradiated wire, and the resistance parameters are generally 50KΩ, 100KΩ, B25/50=3950K (can be customized according to customers’ requirements), Using epoxy resin encapsulation, the wire tail can be...
Small size Low power consumption 1808 used for charger bank light Small size: LED is basically a small chip encapsulated in epoxy resin, so it is very small and light. The 1808 is one of the most mature LED pac...
Air Conditioner Evaporator Sensor with Standard Aluminum Casing MFB Series Features: A radial glass-encapsulated thermistor element is sealed with epoxy resin Proven long term Stability , Reliability, and h...
Air Conditioner Evaporator Sensors with Standard Aluminum Casing MFB Series Features: A radial glass-encapsulated thermistor element is sealed with epoxy resin Proven long term Stability , Reliability, and ...
Air Conditioner Evaporator Sensor with Standard Aluminum Casing MFB Series Features: A radial glass-encapsulated thermistor element is sealed with epoxy resin Proven long term Stability , Reliability, and h...
Copper Probe Air Conditioner Temperature Sensor 20K 3950 MFT Series Features: ■ A glass-encapsulated thermistor / epoxy-cotated thermistor is sealed in a ABS,Nylon,Cu/ni ,SUS housing. ■ Proven long term Stabili...
10K 3470 CuNi Probe Refrigerator Temperature Sensor MFT Series Features: ■ A glass-encapsulated thermistor / epoxy-cotated thermistor is sealed in a ABS,Nylon,Cu/ni ,SUS housing. ■ Proven long term Stability an...
ABS Housing Freezer , Ice Bank Temperature Sensor 10K 3435 MFT Series Features: ■ A glass-encapsulated thermistor / epoxy-cotated thermistor is sealed in a ABS,Nylon,Cu/ni ,SUS housing. ■ Proven long term Stabi...
...food safety and uses epoxy resin with excellent performance of moisture-resistant for an encapsulation. The products can be designed ccording to your every single requirement, which included dimensions, appe...
...Series Brief Introduction: MFT-03 series choose ABS housing, nylon housing and encapsulated with epoxy resin. TPE housing which is widely used in temperature measuring and controlling for cryogenic refrigera...
...℃, the deviation is ±0.5℃ at the temperature range of -10℃~+80℃. The product adopts food-grade SS304 tube as a housing, greysheathed cable as a conductor and epoxy resin for an encapsulation, the size of SS3...