| Sign In | Join Free | My burrillandco.com |
|
... 3 kinds of test requirements: 1) Durability Test The spring undergone a repeated specific force, the test cycles is pre-settable, and the test stop when the set cycle is up. 2) Fix stroke test The presser c...
...Testing Machine/Chair Strengh Tester Product Description: Chair Base Vertical Force Tester is used for the vertical pressure testing, destructive testing and fatigue testing of the office chair Ipomoea base ...
...Cycling Test Chamber 800L Complied Standards & Clauses for Temperature and Humidity Control Cycling Test Chamber IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT” IEC60068-2-2:2007 ...
... method is: fix one end of the earphone on the torsion clamp and fix headband on the support frame, then set test angle and rotating speed. After certain test cycles (can be set from 0-999999), take down the...
...Cycling Test Chamber conform to the IEC60068-2-1:2007, IEC60068-2-2:2007, IEC60068-2-78:2007, IEC60068-2-30:2005, GJB150.3-1986, CJB150..4-......
... to do bending test. Test method is: short-circuit clamping one end of wire and fastening it on the rotary disc, leaving it rotating right and left hanging certain load, to assess whether wire is in good con...
..., shoes (outer sphere, lining, underlayment) and fabrics. It can simultaneously test four specimens, in the test, the hammer repeatedly abrades specimen in variational direction, to know anti-abrasion perfor...
...Cycle Test Systems , Auto Cycling Heating Systems I. Product Description: CHCTS series Cable Heat Cycle Test System is the equipment for cable auto cycling heating system, suitable for XLPE cable test. It’s ...
... is (50 +/- 10 Shore) 2) Test speed is adjustable from 15 to 30 cycles per minute. 3) Two set of fixture provided for the lever handle type ovenware and ear type handle ovenware. 4) Pre set counter for the t...
...Test Machine with 0 ~ 300 mm Stroke Product description: This Connector Durability Tester is to simulate to operate the electronic product, test for insert & extract the USB, the earphone plug to the earphon...
...Test Electronic Machine With Digital LCD Display Product description: This Connector Durability Tester is to simulate to operate the electronic product, test for insert & extract the USB, the earphone plug t...
Cycling Vibration Testing Equipment with Transportation Simulation ISTA-1A/1B Model: RS-8409 Purpose: RS-8409 apply for Transportation test of toys, electronic parts, houseware, IT, communication, furniture, gi...
...Cycling Test Chamber 1500L Complied Standards & Clauses IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT” IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, ...
...very powerful climatic chambers used to perform hot and cold cycles with steep temperature gradients(from 3 to 15°C/min depending on the temperature) ranges Applications Temperature adaptability test under t...
... properties test of materials and components, which can carry out tensile, compression, low cycle and high cycle fatigue test. The equipment is equipped with high and low greenhouse, which can carry out mech...
... and static mechanical property test on materials and components, including tensile, compression, low-cycle and high-cycle fatigue test. Equipped with high and low temperature chamber, it can do mechanical t...
... To check if the products function normally or not after certain cycles tests. The micro-drop testing machine is suitable for mobile phones, tablet computers, electronic dictionaries and other microdrop repe...
...Test Space 15℃/m Rapid-Rate Thermal Cycle Chamber Rapid-Rate Thermal Cycle Chamber in Mentek are available From 1 to 20°C/min Temperature Change Rates.Tests volumes from 150 liters to 1500 liters and Tempera...
Automatic Multi-point Cycle Test Impact Testing Machine for Steel Ball Free Fall Test Three-axis automatic falling ball impact testing m... *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, bo...
... cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to .....