| Sign In | Join Free | My burrillandco.com |
|
...Parking Lot Quick details: 1.Falling/rising time:3.2 s 2.Standard level length:3.5m 3.Falling protection , infrared ray protection,and collision prevention 4.Hi-reliable microprocessor 5.Multible interfaces ...
...Bus Station Quick details: 1.Falling/rising time:1.8 s 2.Standard level length:4m 3.supply voltage:AC230V or AC110V 4.Maintenance-free motor 5.Falling protection and collision prevention 6.special steel plat...
... two buildings as aisle canopy, or is placed above the entrance or top of the building to prevent rain, wind and high altitude. A building assembly in which fall objects fall and protect. Applicable to both ...
... Closed, Protect Your Stuff from Falling Out 1. Simple opening and closing can save effort; 2. Can be installed on cabinets, cabinets, drawers, etc. Help keep cabinet doors closed and prevent items from fall...
..., stable and not easy to slip off. Suitable for kitchen, laundry room, bathroom room. One box, one item, classified storage, with cover design to prevent other items or dust from falling into, special for de...
... in the loading area of the conveyor belt to replace the traditional impact idle, it is designed to reduce shock and stress to conveyor belt caused by the falling materials, avoid abrasion and tear by sharp ...
...fall and sweat, it is a good helper for fitness exercises. Stabilize the crocodile mouth mounting area: the weight plate can be well fixed so that it will not fall, and it is more assured. Knurled handle des...
... / Keys (Optional) Motor Power 2.2 Kw Photoelectric Sensor Prevent people or cars entering by mistake during operation Anti-falling Device Multi-level locking holes Warning Device Buzzer alarming during oper...
...surface; 4. Anti-falling and non-slip hand guards are installed on the pole. During the push-pull operation, the operator can easily grasp and push and pull during the use, and protect the hands to prevent t...
...surface; 4. Anti-falling and non-slip hand guards are installed on the pole. During the push-pull operation, the operator can easily grasp and push and pull during the use, and protect the hands to prevent t...
...surface; 4. Anti-falling and non-slip hand guards are installed on the pole. During the push-pull operation, the operator can easily grasp and push and pull during the use, and protect the hands to prevent t...
...surface; 4. Anti-falling and non-slip hand guards are installed on the pole. During the push-pull operation, the operator can easily grasp and push and pull during the use, and protect the hands to prevent t...
...surface; 4. Anti-falling and non-slip hand guards are installed on the pole. During the push-pull operation, the operator can easily grasp and push and pull during the use, and protect the hands to prevent t...
...surface; 4. Anti-falling and non-slip hand guards are installed on the pole. During the push-pull operation, the operator can easily grasp and push and pull during the use, and protect the hands to prevent t...
...steel channels, which are placed over the beams of pallet racks. This structure prevents pallets or products from falling, improves load distribution, and enhances warehouse safety. Features & Advantages Saf...
...environments where temperatures can fall below -45°F (-43°C). The chemistry and manufacturing process are specifically designed to maintain ductility and prevent brittle fracture at these critical low temper...
...makes it easy to apply the oil evenly, no more rollers getting stuck or falling out. The screw thread finish roller bottles for oils mouth matched with the cap, which fits tightly and can effectively prevent...
... nozzle into the interior of the mold. The tapy A sprue bushing is fixed to the mold with 2 bolts to prevent it from falling off due to the injection pressure. In order to prevent leakage of plastic material...
... of the mold. The tapy A sprue bushing is fixed to the mold with 2 bolts to prevent it from falling off due to the injection pressure. In order to prevent leakage of plastic material, the feed port is genera...
...o the interior of the mold. It is fixed to the mold with 2 bolts to prevent it from falling off due to the injection pressure. In order to prevent leakage of plastic material, the feed port is generally desi...