| Sign In | Join Free | My burrillandco.com |
|
Product Description: The needle detector is a useful instrument for detecting metal impurities in a wide range of settings. It is used in industries such as toys, garments, clothing, zippers, hardware buttons, ...
...Tester Application: The method used to determine the fire-reaction performance of building materials or products (excluding floor coverings and those referred to in resolution 2000/147/EC) in the monomer com...
ISO 5660-1 & 2 Cone Calorimeter TCCT Cone Calorimeter.pdf Introduction: Heat release quantity is the core parameters to evaluate the fire behavior of materials and products.Our Cone Calorimeter can meet all exi...
...test the thermal insulation performance of flame retardant protective clothing fabrics exposed to radiant heat sources and convection heat sources. Standard: ISO 17492:Technical Corrigendum 1-2004 NFPA 1971:...
FAR 25.856 Part VI Flame Propagation Test Apparatus Introduction: Critical Radiant Flux is the main parameters of the fire risk for flooring materials, It reflects the burning and spreading ability of flooring ...
...ve 79℃ and below 400℃ except fuel oils. Standard: ASTM D 92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester GB/T3536-2008 Petroleum Products - Determination of Flash and Fire Poin...
Building Materials Flammability Tester Radiant Flooring Panel Apparatus Application Critical Radiant Flux is the main parameters of the fire risk for flooring materials, it reflects the burning and spreading ab...
...Radiant Plate Flame Spread Tester Product Introduction: The Radiant Panel Flame Spread Tester uses gas-fired radiant panels to test the flammability of building surface materials (ASTM E162) and foams (ASTM ...
... materials reaction to fire tests in the Euroclass system. The tester measures the spread of flame of the sample, under thermal exposure, using a radiant heat ignition source. The thermal exposure is that of...
... Ignition Testing Machine for Insulation Materials Product Overview: According to the IEC 60950-1:2001 "security of information technology equipment" and UL746A, IEC60947.1: 1999 and other standard...
Flammability of Vinyl Plastic Film Testing Machine for CFR 16 Part 1611 Feature: l Stainless steel test cabinet, equipped with transparent viewing window; l 22# needle flame, flame length adjustable; l Inching-...
... standard ISO 1182 and is used to test the non-combustibility of building and rail transit materials under high temperature conditions of 750℃. By placing the sample in a furnace at 750℃, the equipment can a...
... to simulate the effect of a samll flame which may result from fault condition, in order to assess by a simulation technique the fire hazard. Test sample:Lighting, low-voltage electrical appliances, househol...
Gas Flow Range 0.1-1L/min Vertical Flame Test Chamber Application Applies to check the section area more than 0.5mm2 of single insulation wire and cable vertical flame propagation testing. Standards According t...
Introduction: The CCT Cone Calorimeter is designed and manufactured according to international standards and mainly for building products and electric cable testing. The analysis cabinet of our CCT Cone Calorim...
IEC 60811-504:2012 Mandrel Test Apparatus & Impact Test Apparatus 1. Remark: The electric low-temperature winding test device is suitable for evaluating and measuring the performance of round cables or round in...
FAR 25.853 Part IV OSU Heat Release Rate Test Apparatus Introduction: The OSU heat release rate test apparatus, originally designed by Smith of Ohio State University in 1972, became FAA's designated combustion ...
...Test Machine Big Combustion Chamber Furniture Testing Machine 0.1s 150 Degree Fire Testing Equipment , Blanket Vertical Flammability Chamber Descriptions: Blanket Flammability Tester is designed and develope...
...Fire Testing Equipment Non- Combustibility Tester Scope: It is mainly applicable to the test method to determine the combustion performance of building materials under specified conditions. It is applicable ...
Automatically Vacuum Chamber Helium Leak Test System for Refrigeration Parts It is required to be leak free for the heat-exchangers, valves, reservoirs and others else refrigeration parts. As there might have w...