| Sign In | Join Free | My burrillandco.com |
|
...Fire Nozzle 1. Open the fire hydrant door and take out the water hose and water gun. 2. Check whether the water hose and connector are in good condition. If they are damaged, it is prohibited to use them. 3....
... (section area is greater than 0.5mm2) or less than 8mm (section area less than 0.5mm2) of single wire and cable flammability evaluation. Suitable for lighting equipment, low-voltage electrical appliances, h...
Aluminum forging Storz Fire Hose Coupling 1" to 4" with hose tail Symmetrical half coupling of German origine and similar to the French Guillemin system (not interchangeable!). The couplings are locked by putti...
....11,figure 29. It is used to determine the permanent deformation of the hose and connecting tubes of the vacuum cleaners after being squeezed. Equipment Features: 1. Using LCD digital display controller, all...
...t professional OEM manufacturer in the country,we mainly produce Fire,Testing Equipment, Construction Materials Testing Equipment, Plastic Testing Equipment, Wire Testing Equipment, Environmental Test Chambe...
... it with butane gas. The fire hazard of the equipment when there is flammule inside the equipment that caused due to the fault condition is assessed by whether the specimen can be ignited or the combustion t...
...fire fighting system Specification of Gost Water Nozzle Size Water outlet A(mm) B(mm) 2'' Φ 16 305 100 2.5'' Φ16 310 116 Application of Fire Nozzle 1.open the fire hydrant door and take out the water hose an...
...Fire Grip Nozzle With High Flow Size Water outlet A(mm) B(mm) 1 1/2’’ Φ12 450 150 2’’ Φ12 435 150 2 1/2’’ Φ12 440 150 Application of Fire Nozzle 1. open the fire hydrant door and take out the water hose and ...
...Fire Extinguisher Impact Test Machine Meet the standards: GB/T 4351.1-2005 ISO 7165 Scope of application: Mainly suitable for vibration test of portable fire extinguisher with 1kg~8kg. Test method: After dry...
...Fire Extinguisher Impact Test Machine Model: DX9027 Meet the standards: ISO 7165,GB/T 4351.1-2005 Scope of application: Mainly suitable for vibration test of portable fire extinguisher with 1kg~8kg. Test met...
...Fire Extinguisher Impact Test Machine Meet the standards: GB/T 4351.1-2005 ISO 7165 Scope of application: Mainly suitable for vibration test of portable fire extinguisher with 1kg~8kg. Test method: After dry...
...Test Apparatus for Testing the Mechanical Strength of Current-Carrying Hose as Per IEC60335-2-2 1. Introduction his test apparatus is designed according to IEC60335-2-2 clause 21.102 figure 101 and IEC60335-...
Fire Hose Cabinet Frame Making Machine Brief Introduction - Fire Hose Reel Cabinet The fire hydrant box refers to the box used to store the fire hydrant. It is used to extinguish the fire when a fire occurs. It...
...Test Equipment Needle Flame Tester Product Introduction The test machine is designed and manufactured according to the requirements of the relevant standards IEC60695-11-5, the needle-flame tester is the spe...
...Test Equipment Spray Nozzle And Hose Nozzle Test System For IPX3 To IPX6 PLC Control Standard: IEC 60529 Degrees of protection provided by enclosures (IP Code) IPX3, IPX4, IPX5, IPX6. Application: This machi...
... Test Method Application Test method for determining the reaction to fire performance of building materials and products (excluding flooring) and products specified in European Commission Resolution 2000/147...
...Fire Resistant Tester Product description: As the development of high-rise buildings, the improvement of the fire-prevention level and the safety awareness of citizens, the medium voltage fire resistant wire...
...Equipment Textile Fabric Water Bath Testing Machine Product description: This textile water bath tester can connect other textile test equipment and others through hose, As a constant source supporting use. ...
...Testing Equipment for GWIT and GWFI Testing 1. Introduction of Glow Wire Flammability Testing Machine Glow wire flammability testing equipment is an electrical safety test designed to evaluate the flame resi...
...test method is used for fire technical modelling. The data from the test results can be used for modelling bigger fires. A fire sequence in the ISO 9705 – Room Corner Test and EN 13823 – SBI can for example ...