| Sign In | Join Free | My burrillandco.com |
|
...Testing Equipment With PLC+Touch Screen Overview: Application Background: Damage to products and materials caused by natural water (rain, sea water, river water, etc.) results in incalculable economic losses...
...Testing Equipment Non Combustibility Apparatus ISO1182 Products: Non-Combustibility Apparatus for Building Material is designed and manfacture according to ISO 1182 international standards. Furnace temperatu...
..., over-current, or short circuit failures within an appliance wiring system, fire protection requirements were created to evaluate and rate the flammability of material used within an appliance. Glow wire te...
...Testing Equipment / Combustion Chamber 1. Description The tester is designed according to GB/T 19216.11-2003/IEC 60331-11:1999 "Line integrity test of cables and optical cables under flame conditions Part 11...
...Test Equipment Thermal Radiation Dripping Test Apparatus Introduction: The Dripping Tester, in accordance with NF P92-505/ECE R118, is used to determine the melting behaviour of materials under a 500W radian...
...Fire Resistant Tester Medium Voltage Wire Testing Equipment Customized Color HH52019B TICW8-2012 Product description: As the development of high-rise buildings, the improvement of the fire-prevention level a...
...Test Equipment Test Monitor Teaching Demonstration Laboratory Scope of application: Suitable for experimental teaching and monitoring of electric fire simulation; Through experimental teaching and the actual...
Electric Wire Bending Resistance Testing Machine for Metal Wires Technical Parameters: 1. The sample diameter 0.3-10mm 2. The length of the sample 150-200mm 3. Bending angle 90 4. Bending speed < 60 times /...
..., the battery should not catch fire,smoke or explode. It is also an essential testing device for every battery manufacturer and Research Institute. Features: 1.The wire enclosed with metal fire-proof cover, ...
Protective Clothing Molten Metal Splash Test Machine ISO9185 Product Description: Evaluate the material's resistance to liquid metal splash During the test, an appropriate amount of molten metal is sputtere...
ASTME84 Standard Scope: The ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials is one of the building codes' most frequently specified standard test methods. Test and ev...
...Testing Instrument Product Description This instrument simulates small flames generated under fault conditions (e.g., leakage currents, component overheating, poor contacts) to assess fire hazards. Needle Fl...
... detail:: 36x23x12cm/2pcs/carton Type: Jet spray Specific Use: Fire safety Material: Cast iron or ductile iron /brass Color: Natural Product name: Jet spray fire nozzle Size:: 40A(1-1/2"), 50A(2"), 65A(2-1/2...
... detail:: 36x23x12cm/2pcs/carton Type: Jet spray Specific Use: Fire safety Material: Cast iron or ductile iron /brass Color: Natural Product name: Jet spray fire nozzle Size:: 40A(1-1/2"), 50A(2"), 65A(2-1/2...
..., or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of materials, products, or assemblies under actu...
...Testing Equipment ZY6291 Vertical Fire Resistance Test Furnace Scope of application: Fire resistance test for the bus - line of a building designed to prevent flame spreading. Meet the standard: In accordanc...
..., or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of materials, products, or assemblies under actu...
220V / AC 50Hz Flammability Testing Equipment Needle Flame Tester Use It used to determine flammability, ignition temperature and fire fatalness for products, which include lighting, low voltage electronic appl...
Single Insulated WIre and Cable Vertical Flame Test Equipment , Specimen Length 600 ± 25mm Description of the instrument IEC 60332 Single Insulated Wire or Cable Vertical Flammability Tester is ......