| Sign In | Join Free | My burrillandco.com |
|
... of PLC Control Product information: KingPo has designed a series of PLC control with 7 inch touch screen display system test equipment, they are more humanized than the old version ones, and the new version...
...Test Method of Flammability for Building Materials Description: Ignitability test, also called single-flame source test. Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building st...
... paths in solid insulating materials, due to the electric stress and electrolytic contamination of the surface. This test is complex and the person performing it should be accurate and maintain good cleanlin...
...Flammability Testing Equipment , 133mm Ul 94 Flame Test Scope of application: It is applicable to evaluate the characteristics of heat-proof insulation material under high intensity open flame. Meet the stan...
Automotive Interior Horizontal Flammability Tester, 18Kg Ul Flammability Testing Description: Horizontal Flammability Tester. To determine the comparative burn rates and burn resistance of textiles, particularl...
SPI Flammability Tester With Photoelectricity Sensor Accurately By Standard CFR 16 Part 1611 Application SPI Flammability Tester (Vinyl Material), to determine the ignition properties of vinyl plastic film mate...
Laboratory Testing Equipment IEC60695-11-5 Needle Flame Test Chamber Product information: The Needle Flame Tester consists of a 0.9mm needle-shaped burner that tilts with the angel of 45and provide it with bu...
Electrical Control Needle-Flame Tester Of Button Operation With Air Vent And Temperature Of 01100 Product Introduction The test machine is designed and manufactured according to the requirements of the releva...
stainless steel frame Automotive interior Flammability test machine APPLICATIONS & TEST PURPOSE: The machine is used to test foam relative combustion rate and flame resistance. It also applys to automobile inte...
IEC 60695-2-20 Hot Wire Ignition Coil Test Method Apparatus Complied Standards & Clauses IEC60695-2-20 Fire hazard testing - Part 2: Glowing/Hot wire based test methods - Section 20: Hot-wire coil ignitability...
Building Materials Non-combustible Test Furnace First, the scope of use The test furnace is developed according to the technical specifications and requirements specified in the national standard GB/T5464-2010,...
Why is the SBI so important? Most construction products sold in Europe will shortly need to be tested and classified using a new test method called the Single Burning Item (the SBI) EN 13823. The construction p...
Car Inner Ornament Vertical Flammability Tester Product information: The burn resistance tester conforms to the standard of ISO379,ASTM D5132. It is suitable for evaluating the horizontal firing characteristic ...
EN71 Surface Flammability Tester Fire Mouth Bottom 4 2.7mm,Head Movement Speed1505mm/Sec (bidirectional) Standard BS4569,EN71 Application The device is for the detection of the fuzziness of fluff or fur fabri...
Touch Screen Control Flammability Testing Equipment Fireproof Coating(Method of large plate) Technical indicators 1.PLC+NA view professional software, touch screen ......
45 Flammability of Wearing Apparel Apparatus Introduction This 45 Flammability Apparatus is designed according to the latest edition of the national standard GB/T14645 design and manufacturing.It applies to...
FMVSS 302 Horizontal Flammability Tester Product introduction The instrument consists of two parts: the control box and the combustion box. The sample is clamped flat by the clamp and placed on the bracket of t...
FMVSS 302 Horizontal Flammability Tester Product introduction The instrument consists of two parts: the control box and the combustion box. The sample is clamped flat by the clamp and placed on the bracket of t...
... (foam rubber). Its design, production, inspection and so on each link all the strict implementation of GB/T8332 "level of foam plastic combustion performance test methods - burning law,...
...widely used for the testing of electrical products. The test measures the burning rate of samples positioned either horizontally or vertically. It conforms to all five UL 94 horizontal and vertical burner te...