| Sign In | Join Free | My burrillandco.com |
|
... created by pendulum effect. Parameters: 1. Load cell capacity: 0-2500N 2. Accuracy: +/-0.5% 3. Direction: Horizontal 4. No of loading advice:4 in total 5. Loading Point height: 30-180cm 6. Motor : 4 servo a...
Manual Asphalt Breaking Point Tester Asphalt Testing Equipment Features: The instrument is composed of outer cylinder, temperature preservation cylinder, thermometer, lower plate, upper grip,fi xing ......
DX8534 Thermal Deformation, Vicat Softening Point Temperature Testing Equipment (Micro Control) Standards: It meets the requirements of GB/T 8802-2001, ISO 2570 (PVC), GB/T 1633, GB/T 1634, ISO 75-1987 (E), ISO...
Product Description: YBS-H fully automatic closed flash point tester, using a touch screen instead of keyboard operation. It is used to determine the closed flash point value of petroleum products. Adopting adv...
Testing Equipment For The 0.4KW 10KN Glass Bend Testing Machine With Special Jig Product Description The bend testing machine is used to test bending fatigue, bend strength of brittle materials, such as ceramic...
Testing Equipment For The 0.4KW 10KN Glass Bend Testing Machine With Special Jig Product Description The bend testing machine is used to test bending fatigue, bend strength of brittle materials, such as ceramic...
...China GB/T 4929 Lubricating grease- Determination of Dropping Point and ASTM D566 Standard Test Method for Dropping Point of Lubricating Grease. I. Main technical features 1. The oil bath is composed of heat...
... and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering. It is used to do the Marshall stability test and judge the destroy point for bituminous materials.It can do the proportion design ...
... anti fuel self ignition point meter The SH706B fully automatic self ignition point meter is based on the power industry standards DL/T 706-2017 and GB/T 5332 of the People's Republic of China for testin...
...point of cord exit is at the center of rotation. The rotating jaws are to be adjusted to rotate to an angle of 90° to each side of the centered position. At the centered position, the cord is to ......
... time is only 2-3 minutes, which is much faster than traditional testing methods. The test range of 0-100% allows for a comprehensive analysis of crude oil. The power supply required is AC220V/50Hz, while th...
...test tube and mixing it with mechanical agitation. The mixture is heated at a controlled rate until the two phases are completely mixed. The mixture is then cooled at a controlled rate, and when the two ......
...industry standard ASTMD892. It is equipped with a 1000 mL test cylinder and a gas diffuser with a range of 3000 ~ 6000 mL/min under 2.45 KPa. The temperature control range is from 0℃ to 99.9℃. The output for...
...: - ISO 871 - ASTM D 1929 - GB/T 4610 - GB/T 9343 Specification: Temperature of copper furnace: - Can be constant between 150~450 ℃ ; - Equipped with...
...Test Equipment is a versatile Ingress Protection tester designed to assess the degree of protection provided by a product against the intrusion of foreign objects such as dust and water. With a measurement s...
...Testing Equipment For Clamp Compression Testing Clamp Compression Testing Method of Large Products 1.Before placing the packaged product between platens, verify that the clamp force using the clamp indicator...
..., quickly compose the result (NG or OK), and mark the NG position to confirm the positive and negative electrode before the battery pack enters the point welding,...
... detection of flash point locking results, printing of results, and automatic shutdown of gas source. The instrument has the advantages of accurate measurement, good repeatability, stable ......
... result from the biting. The part of the toy being tested is placed in a bite test clamp & a specified force is applied for a specified period. The toy is then tested to ascertain whether or not any hazards ...