| Sign In | Join Free | My burrillandco.com |
|
...Test Finger Probe 14 Test Bar Conforms to IEC61032 with CNAS Certificate Introduction: It’s designed according to IEC61032 Figure 10. This bar is intended to verify the protection against access to hazardous...
...IEC61032 fig.1, and meet the requirements of IEC60529 regarding IP1X testing and IEC60065. This probe is intended to verify the protection of persons against access to hazardous parts Test probe A with 50N f...
Cone Probe Conform to the UL1278 Fig 10.1 UL Test Probe Product details: This probe conforms to the standard requirement of UL1278 Fig 10.1. The handle is made of nylon while the probe is made of stainless stee...
... inspection to prevent direct contact of handheld tools.It can be customized with a 3 ± 0.3N pushing force. Standards Compliant with the requirements of IEC61032 Figure 2 test fixture C,...
...Children Test Finger 19 IEC61032 Children Test Finger 19 Article NO.:BND-19 Specification: Children Test Finger / Children Test Finger19 1, According to : IEC61032-1997 Fig12 and Fig.13 / EN71 ASTM F963 and ...
... with a plastic handle. Meets IEC 60950 and 61032, Figure 9 (Test Probe} Model TP12 IIEC 61032, Figure 9 short test probe pin Used to test accessibility through enclosure openings per IEC, EN, UL and CSA Sta...
...test probe,IEC 60335 IEC 60065 Model TP11: rigid test probe,IEC 60335 IEC 60065 rigid test probe is used to assess protection of persons against access to dangerous parts and to assess the mechanicalresistan...
...Test Rod Probe Product details: It conforms to standard requirement of UL1278 Fig 10.4. The handle is made of nylon and the probe is made of hard steel. Standard:UL1278 Fig 10.4. Application:The heating elem...
...Probe Product information: This testing probe is used to verify the protection against access to hazardous parts through top openings. It meets IEC, EN, UL and CSA Standards, including IEC 1010, IEC60065, EN...
...Test Rod ,Test Probe 32 Product information: The test rod probe confirms to IEC61032 figure 15 requirements. It is intended to verify the protection provided by fan guards against access to hazardous mechani...
...Test Hook Probe Product information: The test hook complies with IEC60065. It is used to test whether the dangerous electric parts can be touched. The test hook is “hooked” into vents and seams in the enclos...
...Test Probe Kit of Jointed Finger Probe | Test Pin Probe | Test Thorn Probe Meets GB4706.1-2005. Accessibility probes are used to test the size of openings to ensure that fingers and objects do not have acces...
IEC 60335-2-107 Figure 102 Foot probe test...
Custom Solar Light 94v0 LED PCB Board Aluminium Flying Probe Custom solar light pcb 94v-0 aluminium pcb circuit board pcb leds What is an SMD LED PCB Board? ......
... SФ12.5+0.20 mm SФ12.5+0.20 mm Force ---- 50N Standard IEC61032 IEC60529 Product information: This test sphere probe confirms to IEC61032 figure 6 probe 2, IEC60529 of IP2. It is intended to verify the degre...
... SФ12.5+0.20 mm SФ12.5+0.20 mm Force ---- 50N Standard IEC61032 IEC60529 Product information: This test sphere probe confirms to IEC61032 figure 6 probe 2, IEC60529 of IP2. It is intended to verify the degre...
... probe 41 Model TP41: IEC 61032 test probe 41 For testing accessibility in appliances with visibly glowing heating elements. Also for testing parts supporting such elements. Complies with IEC, EN, UL & CSA r...
... Finger Probe would be difficult. The Unjointed Finger Probe meets IEC 61032 requirements, Figure 7, Test Probe 11.The Finger Probe may be used to verify the protection of persons against access to hazardous...
...Test Finger Probe Products information: This rigid finger probe conforms to the standard requirement of IEC61032 figure 7 device 11,IEC60884,IEC60598,IEC60335,IEC60065. It is used to verify the protection of...
...Test Finger / Test Probe B for IP2X with 10N Thruster 1. Introduction: Test probe B ( jointed test finger) is design according to IEC61032 figure 2, meet the requirements of UL507, UL1278 figure 8 and EN6052...