| Sign In | Join Free | My burrillandco.com |
|
... to IEC60598-1 clause 4.4.4 Product Overview For Fluorescent Lamp Holder Axial Force Test Device: It is applicable to axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the...
...displacement of pins (including bosses) of unmounted bi-pin caps G13. Testing: The pins of the cap shall enter the gauge at surface O and, when fully inserted, the surface of cap and gauge shall contact. In ...
... is lit by the high voltage released by the rectifier, and cannot be turned on when the voltage is reduced. The LED lamp can be lighted within a range of voltage (such as AC 220-240V) 2. Good versatility The...
... digital torque meter refers to IEC and GB standards, and meet the test demands of labs and factories. Features: ● Clamps fix the lamp caps, rotate the luminaire to test the positive and negative torque. ● T...
IEC60061-3 Go No Go Gauges for Lampholder Lampcap and Bases with CNAS Certificates 1. Introduction Lamp cap and Lampholder Gauges are designed according to IEC60061-3, it is also be called to go / no go gauge. ...
... Tube Length(ft) : 4ft Product Specification: Input Voltage(V) AC 85-265V Lamp Luminous Efficiency(lm/w) 140 CRI (Ra>) 85 Working Lifetime(Hour) 50000 Lamp Body Material Aluminum Alloy IP Rating Ip44 More Pi...
...G13 4ft 120cm 5 Years Warranty 140lm/W Warm White Product Features: 1. ETL, TUV, CE, ROHS, LVD, EMC, SAA, CB, ISO9004 Approved. 2. 19mm wide PCB with excellent heat dissipation design. 3. Driver with rubycon...
... test item requirements, test content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time I minutesthen quit, deformation detect...
...G13 100-240V Light Led Tube Light Quick Details Light Source:LED Item Type:Tube Lights LED Light Source:SMD2835 Warranty(Years):2 Input Voltage(V):100V-240V Lamp Power(W):10 Lamp Luminous Flux(lm):1000 Lamp ...
G13 ceramic lamp holder 30 w, 40 w hospital with ultraviolet germicidal lamp...
...displacement of pins (including bosses) of unmounted bi-pin caps G13. Testing: The pins of the cap shall enter the gauge at surface O and, when fully inserted, the surface of cap and gauge shall contact. In ...
... can measure the torque value of lampcaps of different luminaires like LED bulb, HID lamp and CFL lamp by equip with different fixtures. The equipment is consisted by secondary meter, torque device and test ...
...G13 3ft 90cm 12w 14w For Bedroom Warm White Aluminum SMD 2835 Product Features: 1. 180lm/W high lumen G13 t8 led tube light with high bright led chip SMD5730. 2. 19mm wide PCB with excellent heat dissipation...
...,workshops etc. 3. Indoor lighting & outdoor lighitng LED Tube Light Bulbs Advantages: 1. Wide voltage range The traditional fluorescent lamp is lit by the high voltage released by the rectifier, and...
...dual-end powered connections. Capable of both 120V and 277V wiring installations and can work with existing shunted lamp holders/tombstones when dual end connected. If using a single-end install, you will ne...