| Sign In | Join Free | My burrillandco.com |
|
... to the requirements of the relevant standards IEC60695-11-5, the needle-flame tester is the special instrument used for the fire hazard test of the small flame caused by the fault conditions in the simulati...
...Testing Equipment For Circular Saw Switch And Lower Guard Standard of IEC Testing Equipment: IEC 60745-2-5 Hand-held motor-operated electric tools – Safety – Part 2-5: Particular requirements for circular s...
...Testing Equipment Needle Flame Test Standard: IEC 60695-11-5 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance Application: This ...
...Testing Machine Auto Parts Test Equipment 0 ~ 250mm Product Description: Test trip: 100cpm Test speed: 99cpm Scope of application: Alternating load durability testing machine Type: Alternating load durabilit...
...Gauge A with 20N and B with 1N for Checking Shutters Test Probes 1. Introduction of Gauge A and B test probes: The gauge A and B test probes are strictly designed according to IEC62196-1-2022 clause 10.2 fig...
...test system suitable for durability project test of hand-held electric power tool below2.5KW; meet standard of GBB3883.1-2008,GB3881.7-2012 Term17,IEC6074-2-6:2003;professional testing equipment for professi...
... test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and duri...
...Test and Close time Test Equipment with Circular Saw at a 90° cut Product information: This device conforms to the standard requirement of EN 60745-2-5:2010 clause 19,IEC60745-2-5:2003 and Annex BB. It is us...
Test finger nail , IEC 60335-1 Figure 7 Test Equipment Test finger nail Product information: The test finger nail complies with the IEC 60335-1figure 7 standard requirements. It is applicable for the non-remova...
... one of the following apparatus: – a twin enclosed carbon-arc (see C.2.3) with continuous exposure for a minimum of 720 h. The test apparatus shall operate with a black-panel temperature of 63 °C ± 3 °C in a...
...: – a twin enclosed carbon-arc (see C.2.3) with continuous exposure for a minimum of 720 h. The test apparatus shall operate with a black-panel temperature of 63 °C ± 3 °C in a relative humidity of (50 ± 5) ...
AC220V Rubber Testing Equipment Material Testing Machine Powerful Application: Plastic rubber melt flow index equipment can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acr...
...Testing Equipment With Drop Height 400~1500 Mm Of Power AC220V/ 50Hz Product Description: Packaging Drop Testing Equipment During the products handling or transport process, there may be drop/ fall, which re...
...Testing Equipment is an essential tool for accurately assessing the performance and quality of battery cells used in various industries. This cutting-edge equipment is designed with a focus on simplicity and...
...-1,IEC60669-1 standards and etc. It is applicable for household and similar fixed electrical installations’ breaking capacity and normal operation life test, also suitable for testing household and similar u...
..., IEC60669-1 and etc. It is applicable for the switches breaking capacity and normal operation life test of household and similar fixed electrical installations, also suitable for plugs and sockets’ breaking...
... ' clause 8.2.4.3, figure 1 Standard description: The test is to be carried out with suitable test equipment. The specified number of conductors shall be connected to the terminal. The length of the test con...
... tube tester is designed and manufactured in accordance with the standard requirement of IEC60529 IPX3 and IPX4,IEC60335-1 clause 15.1. It is used for the waterproof test of the electrical equipment. The osc...
... and IPX6, IEC60884-1, IEC60335-1, IEC60598-1. Application:It is used for the testing of IPX5 and IPX6. Ingress Protection Test Equipment Test sample:The test apparatus with water proof functions, such as el...
...Test Equipment Test probe 2 - 12.5mm steel ball IEC60335-1 Clause 22.1: If the appliance is marked with the first numeral of the IP system or any of the additional letters of the IP system, the relevant requ...