| Sign In | Join Free | My burrillandco.com |
|
...: based on different filler Tolerance: ISO standard or According to your request Temperature Common: 75~280 degrees; If reinforced with glass fiber or carbon fiber, some material can be reaching over 350℃ pr...
...: based on different filler Tolerance: ISO standard or According to your request Temperature Common: 75~280 degrees; If reinforced with glass fiber or carbon fiber, some material can be reaching over 350℃ pr...
Description PTFE has a wide range of practicable temperature from 180%C - +260C and a wax-like surface to which anything hardly sticks. PTFE has the lowest coefficient of friction of all known solid materials...
...---It easier to remove the resin, dopes, oil and other sticky things. 3. Good mechanical property with no distortion and low friction coefficient. Description: PTFE gasket, PTFE PTFE washer PTFE flat gaskets...
...High working temperatures 6. Low friction 7. Low minimum order quantity 8. Good services Description: PTFE micro-porous membrane Gives excellent wind-proof,water-resistant,warmth-keeping,breathable and stabl...
...filled PTFE baffle ring with low coefficient of friction Specifications: Mechanical properties Carbon fiber filled PTFE ring increases the hardness of PTFE and reduce cold flow or creep. Tensile strength and...
... of final products of this raw material were in line with the national standard. The product is based on PA66 resin as basic, adding glass fiber, efficient flame retardants and various additives, formed by t...
...Filled PTFE Oil guide ring gasket used in rod guide For Shocks Specifications: 1. Heat resistance property---It is able to wok stably between -180°C to +260°C. 2. Excellent non-sticky property---It easier to...
...Filled PTFE Bushing PTFE Self lubricating Bush Sliding Bearing ZR-PC9010 is made of 90% virgin PTFE with 10 carbon filled. This type of bush has less thermal expansion, higher wear resistance, less deformati...
... – 2.19 g/cm3 wear Less than 50mg friction coefficient Less than 0.3 hardness (sinter piston) HRB65-85 Different fillers carbon fiber glass fiber graphite Molybdenum disulfide carbon Description: Filled PTFE...
Description PTFE skived sheets can be customized into different thickness and width. The standard widths are 1000mm, 1200mm, 1500mm; and the maximum width reaches 2 meters. Besides virgin PTFE, compounded PTFE ...
Carbon graphite filled PTFE Ring disc With good elongation @ break 375 degree sintering temp. Style: Mechanical Seal Color: black,white or as per custom Tolerance: DIN ISO3302 -1MA, RMA, A2 or as per custom ...
Elongation @ break > 100% filled PTFE bands fitted on OD of sinter piston in shocks Specifications: properties unit result Apparent density g/cm3 2.10-2.30 ......
... per year. The performance of final products of this raw material were in line with the national standard. The product is based on PA66 resin as basic, adding glass fiber, efficient flame retardants and vari...
...Glass Filled Nylon 66 Toughened Modified PA66 Nylon Resin Material Granules Product Description Glass Fibre Reinforced Polyamide 66 Granules Nylon/PA66 granules reinforced by fiberglass. Granulation capacity...
... per year. The performance of final products of this raw material were in line with the national standard. The product is based on PA66 resin as basic, adding glass fiber, efficient flame retardants and...
Glass Filled Nylon Polyamide66 Material Glass Fiber Reinforced Plastic Granules Product Description Polyamide PA66 Granule also known as Nylon, are thermoplastics that provide strength, temperature and chemical...
... per year. The performance of final products of this raw material were in line with the national standard. The product is based on PA66 resin as basic, adding glass fiber, efficient flame retardants and vari...
...Glass Filled Nylon 66 Chips 25% Fiberglass Polyamide 66 Resin Product Description Glass Fibre Reinforced Polyamide 66 Granules Nylon/PA66 granules reinforced by fiberglass. Granulation capacity of 8,000 tons...