| Sign In | Join Free | My burrillandco.com |
|
...iron phosphate batter Rated voltage/capacity Rated voltage/capacity Single cell voltage 2.5V-3.65V Weight of the battery single cell 1.18kg±0.02kg Dimension 140*23 *160mm Positive Peridot lithium iron phosph...
... and Capacity: From 5T to 250T Material: Cast Iron, Cast Steel and Ductile Iron (Spheroidal Graphite) Mounting Hardware: Galvanized Grade 8.8 bolts, nuts and washers Surface and Paint: Fully painted from our...
... ports and docks. Capacity : up to 200Tons Material: Cast Iron, Cast Steel or Ductile Iron (Spheroidal Graphite) available. Mounting Hardware: Galvanized Grade 8.8 bolts, nuts and washers or Stainless Steel ...
... head bollard is a mostly common type bollard for many kinds of ports or wharfs.The features of marine bollards as below: Capacity : up to 200Tons Material: Cast Iron, Cast Steel or Ductile Iron (Spheroidal ...
... PN7.6/PN11/PN17.6 Main Parts and Materials Number Part Name Material 1 Body Grey cast iron(GG25) 2 Screen stainless steel 3 Bolt Galvanlzed Steel 4 Plug Steel 5 Bonnet Grey cast iron(GG25) 6 Gasket Graphite...
... and cost-efficiency, cast steel has been becoming more significant in the melting pot construction over the last few years against both materials, spheroidal cast-iron and lamellar graphite cast-iron. In co...
...the first to be used for S.G.Iron production. Because of high density (about 8.0g/cc), these do not float easily and hence magnesium recoveries are high and consistent. Our alloys are produced in induction f...
...the first to be used for S.G.Iron production. Because of high density (about 8.0g/cc), these do not float easily and hence magnesium recoveries are high and consistent. Our alloys are produced in induction f...
0.5" Prestressed Concrete Cast Iron Unbonded Monostrand Anchorage Plate for Slab Post Tensioning Description The material for mono anchorage is spheroidal graphite cast iron, which puts traditional anchor ring ...
... the impeller, it is aluminum. The impeller can be made of brass, stainless steel, and PPO., and for the seal, it is ceramic or graphite. Performance Range: Flow rate up to 80L/min. (4.8m/3h) Head up to 55m ...
... 4. Impeller: Brass/Stainless steel/PPO 5. Shaft with rotor: Carbon steel or stainless steel 6. Mechanical seal: Ceramic/ Graphite 7. Bearing: NSK, C&U, or local quality. LIMITS OF USE 1. Manometric suction ...
... MATERIALS 1. Pump body: Cast iron 2. Motor support: Cast iron 3. Motor housing: Aluminum 4. Impeller: Brass/Stainless steel/PPO 5. Shaft with rotor: Carbon steel or stainless steel 6. Mechanical seal: Ceram...
... designed for farm irrigation, circulation system, and other conditions. Its body and motor bracket are made of cast iron, and the impeller is made of brass or cast iron. The raw material for a mechanical se...
... Plane Bounce:<0.03mm Material: 1,Disc:High Carbon Iron 2,Center Hub: Aerial 6061 Aluminum Alloy ROTOR SPECS: 2-piece floating rotors with 6061-T6 aerospace grade alloy hat. Fully balanced from the factory Rotor ring in FC30 cast iron with...
...Graphite Heat Resistant:0-500C Friction Coefficient:0.49 Rotor (Disc+Center Hub) craft: Forged Plane Bounce:<0.03mm Material: 1,Disc:High Carbon Iron 2,Center Hub: Aerial 6061 Aluminum Alloy ROTOR SPECS: 2-piece floating rotors with 6061-T6 aerospace grade alloy hat. Fully balanced from the factory Rotor ring in cast iron with anti...
...Graphite Heat Resistant:0-500C Friction Coefficient:0.49 Rotor (Disc+Center Hub) craft: Forged Plane Bounce:<0.03mm Material: 1,Disc:High Carbon Iron 2,Center Hub: Aerial 6061 Aluminum Alloy ROTOR SPECS: 2-piece floating rotors with 6061-T6 aerospace grade alloy hat. Fully balanced from the factory Rotor ring in FC30 cast iron...
...Graphite Heat Resistant:0-500C Friction Coefficient:0.49 Rotor (Disc+Center Hub) craft: Forged Plane Bounce:<0.03mm Material: 1,Disc:High Carbon Iron 2,Center Hub: Aerial 6061 Aluminum Alloy ROTOR SPECS: 2-piece floating rotors with 6061-T6 aerospace grade alloy hat. Fully balanced from the factory Rotor ring in FC30 cast iron...
...Iron or Nodular Graphite Cast Iron With Computerized Mandrel-Bends, maximizing Smoothest Exhaust Airflow. High Performance JDM Racing Design Redirects Hot Exhaust ......
... Flow: 40LPM Lever: 2 All the castings are made with Shell-Moulding, in special graphite cast iron. This kind of cast iron is of high resistance, and it allows having, with the same external overall dimensio...
...), is a type of lithium-ion battery using lithium iron phosphate (LiFePO4) as the cathode material, and a graphitic carbon electrode with a metallic backing as the anode. The energy density of LiFePO4 is low...