| Sign In | Join Free | My burrillandco.com |
|
...±5 Weight of machine 15kg Power 2PH AC220V Photo Reference Manual Roller Uses: This roller is used for the ready materials of testing peeling strength and...
..., glass fiber,etc. Uses certain weight steel ball and adjust to certain height to let it fall freely and impact test sample. Then check the sample damage degree to judge the sample quality. 2. This tester us...
...Test Machine / Free Fall Drop Tester Product Description This tester is used for testing the fastness of plastic, ceramics, glass fiber,etc. Uses certain weight steel ball and adjust to certain height to let...
...Test Programmable Sus304stainless Steel Standard Gb5169 5114 glow wire tester machine Technology data: accord with standard:GB5169/IEC60695 SIZE:1120W*600D*1020H Glow wire: Φ4mm Ni/Cr(80/20) Thermocouple: Φ0...
... wire: Φ4mm Ni/Cr(80/20) 3.Thermocouple: Φ1mm K style 4.Heating temperature: 50℃ ~1050 ℃ Sample test pressure:1.0N±0.1N Sample move speed :10mm/s~25mm/s(forward backward independent speed) Burning time :0.01...
...Sample Impact Notch Machine Product Description Model: GC-QK-Z Product introduction The plastic electric notch prototype machine(BST-QK-D) is a sample making equipment used in the impact toughness test of no...
...Sample Impact Notch Machine Product Description Model: GC-QK-Z Product introduction The plastic electric notch prototype machine(BST-QK-D) is a sample making equipment used in the impact toughness test of no...
...Sample Impact Notch Machine Product Description Model: GC-QK-Z Product introduction The plastic electric notch prototype machine(BST-QK-D) is a sample making equipment used in the impact toughness test of no...
...Sample Impact Notch Machine Product Description Model: GC-QK-E Product introduction The plastic electric notch prototype machine(BST-QK-D) is a sample making equipment used in the impact toughness test of no...
...Sample Impact Notch Machine Product Description Model: GC-QK-A Product introduction The plastic electric notch prototype machine(BST-QK-D) is a sample making equipment used in the impact toughness test of no...
...Testing Constant Temperature Test Chamber IEC60068-2-2 512L Complied Standards & Clauses It conforms to standards: IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT” Equipment Ov...
... very sturdily constructed with cadmium coated plated for rust protection. It is designed for the reduction of test sample which are too large in volume. It handles any material from size up to 108 mm. Each ...
...Samples Voltage Tester for Corona-Resistant Magnet Wire It can test three samples at the same time. Applying voltage to the three samples at the same time, and it will time them respectively. • Voltage outpu...
.../T1043-93,GB/T1843-1996. 2.Specifications Knife stroke 24mm Knife-entering max speed 4mm/min Sample mode 1...
... to do non metal material impact toughness test with notched specimen preparation equipment, notched impact of prototype equipment can be for scientific research institutes, tertiary institutions, non metal ...
.... Choose the corresponding steel ball according to related standard requirements, then adjust it to be a certain height, and then make it fall freely to impact the test sample. After that, judge the quality ...
...relative to each other.When the two fixtures are close, the sample bends. During the test, the fixture moves at a uniform speed, and the sample repeatedly bends. Observe the damage of the sample. Product inf...
...samples via a gas radiant plate and calibrate with a heat flow meter. Test sample is placed in a vertical position, near the radiation plate, exposed in a clear area calibrated radiation flux. Close to the p...
... drops of sample into the sample well of the cassette. 3.Read results within 15 minutes. Do not read results after 20 minutes. INTERPRETATION OF RESULTS Negative: Only one pink band appears on test region of...
... cut the sample of given size, and is an ideal auxiliary appliance for departments of production, scientific research and quality supervision and inspection of corrugated boards and cartons. Test Standards B...