Home > Minerals & Metallurgy > Non-ferrous Metal > Tungsten >

Grounding Rod Code

Fair Trading Service

Report fraud supplier Report IPR Products

Haven't found right suppliers
Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
And this service is free of charge.
we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!

Submit Buying Request

Total 4866 products for grounding rod code Manufacture & Suppliers

Small Single Straight Hole Tungsten Carbide Rod Blanks HRC 60 OD 5mm

...rods for making drills for HRC 60 steel ISO K10-k20 Cobalt: 12% Outer diameter 5mm +0.3 Inner diameter: 1.5mm ±0.15 Length: 180mm +0.5 mm Surface roughness: Raw sintered Ra 6.3 or as required Application: ul...

Zhuzhou TGC Cemented Carbide Co.,Ltd.
Hunan,China

Site Member

Add to cart
KIC 11.3 Tungsten Carbide Rod Blank 10% Cobalt With Two Coolant Holes

... Ra 6.3 or as required Application: the special high-performance grade for the roughing of titanium and heat-resistant alloys. Grade datasheet: ISO CODE U.S.CODE Binder Density Hardness Transverse KIC g/cm3 ...

Zhuzhou TGC Cemented Carbide Co.,Ltd.
Hunan,China

Site Member

Add to cart
Pitch 87.06 Tungsten Carbide Round Rod K20 - K40 10% Binder For Cast Iron

...rods for drilling tools for steel and cast iron ISO K20-K40 Cobalt: 10% Outer diameter: 16.3mm +0.3 Inner diameter: 2.00 +/-0.15 TK: 9.0mm Pitch: 87.06mm Length: 330mm +3mm Surface roughness: Raw sintered Ra...

Zhuzhou TGC Cemented Carbide Co.,Ltd.
Hunan,China

Site Member

Add to cart
Solid Carbide Helical Coolant Hole Rod K15 OD 8.3mm Tungsten Rod Stock

OD8.3mm Solid carbide helical coolant holes blank for making endmills drills ISO K15 Cobalt: 6% Outer diameter: 8.3mm +0.3 Inner diameter: 1.0 +/-0.15 TK: 3.5mm Pitch: 42.53mm Length: 330mm +3mm Surface roughne...

Zhuzhou TGC Cemented Carbide Co.,Ltd.
Hunan,China

Site Member

Add to cart
Dia 6.3mm Tungsten Carbide Rod With Straight Hole 7.5% Cobalt Bar

...rods with straight hole ISO K10-K30 Cobalt: 7.5% Outer diameter 6.3mm +0.25 Inner diameter: 1.0mm ±0.15 Length: 210mm +5 mm Surface roughness: Raw sintered Ra 6.3 or as required Application: for machining gr...

Zhuzhou TGC Cemented Carbide Co.,Ltd.
Hunan,China

Site Member

Add to cart
Tungsten Carbide Rods With Straight Coolant Holes 15% Cobalt OD 0.619"

...rods OD0.619" Length12.425" ISO K30-K40 Cobalt: 15% Outer diameter 0.619" Inner diameter: 0.079" Length: 12.425" or fixed length as per request Surface roughness: Raw sintered Ra 6.3 or as required Applicati...

Zhuzhou TGC Cemented Carbide Co.,Ltd.
Hunan,China

Site Member

Add to cart
Stainless Steel Carbide Rod With Straight Hole 9% Cobalt 2.5 - 25mm Dia

...rod for making cutting tools for steel stainless steel ISO K20-K40 Cobalt: 9% Outer diameter 2.5-25mm +0.25-+0.5 Inner diameter: as per requested Length: 330mm +5 mm Surface roughness: Raw sintered Ra 6.3 or...

Zhuzhou TGC Cemented Carbide Co.,Ltd.
Hunan,China

Site Member

Add to cart
Small Single Straight Hole Tungsten Carbide Rod Blanks HRC 60 OD 5mm

...rods for making drills for HRC 60 steel ISO K10-k20 Cobalt: 12% Outer diameter 5mm +0.3 Inner diameter: 1.5mm ±0.15 Length: 180mm +0.5 mm Surface roughness: Raw sintered Ra 6.3 or as required Application: ul...

Zhuzhou TGC Cemented Carbide Co.,Ltd.
Hunan,China

Site Member

Add to cart
KIC 11.3 Tungsten Carbide Rod Blank 10% Cobalt With Two Coolant Holes

... Ra 6.3 or as required Application: the special high-performance grade for the roughing of titanium and heat-resistant alloys. Grade datasheet: ISO CODE U.S.CODE Binder Density Hardness Transverse KIC g/cm3 ...

Zhuzhou TGC Cemented Carbide Co.,Ltd.
Hunan,China

Site Member

Add to cart
Stainless Steel 2.5mm Test Finger Probe Rod IEC60529 For IP3 / Suffix C Code Test

...Rod for IP3 and suffix C code Test Introduction: The 2.5mm Test Rod is used to verify the protection of persons against access to hazardous parts. Also used to verify the protection against access with a too...

Pego Electronics (Yi Chun) Company Limited
Jiangxi,China

Verified Supplier

Add to cart
forged monel 400 rod

...rod bar Rods 5/16 to 3/4 in. (7.94 to 19.05 mm) excl in diameter, hot- or cold-finished, solution annealed and pickled or mechanically descaled. Rods 3/4 to 31/2 in. (19.05 to 88.9 mm) incl in diameter, hot-...

AW SUNNY STEEL
China

Active Member

Add to cart
forged monel alloy UNS N04400 rod

...rod bar Rods 5/16 to 3/4 in. (7.94 to 19.05 mm) excl in diameter, hot- or cold-finished, solution annealed and pickled or mechanically descaled. Rods 3/4 to 31/2 in. (19.05 to 88.9 mm) incl in diameter, hot-...

AW SUNNY STEEL
China

Active Member

Add to cart
forged nickel copper alloy 400 rod

...rod bar Rods 5/16 to 3/4 in. (7.94 to 19.05 mm) excl in diameter, hot- or cold-finished, solution annealed and pickled or mechanically descaled. Rods 3/4 to 31/2 in. (19.05 to 88.9 mm) incl in diameter, hot-...

AW SUNNY STEEL
China

Active Member

Add to cart
Dia6x330mm Tungsten Carbide Rod Blanks , H6 YL10.2 Solid Carbide Rods

.... We specialize in solid carbide rod with or without coolant hole. We stocked a large range of dimensions for ground and unground carbide rod. Our grade coverage ISO K05 to K40, from Machining Aluminium, ste...

Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD.
Hunan,China

Verified Supplier

Add to cart
Dia3*100mm Solid Carbide Rods High Strength For Cutting Tools Customization Accepted

...Rod Stock For Cutting Tools We can supply all kinds of dimensions solid carbide rods with fine&sub micron grain size. We specialized in tungsten carbide round bars with outstanding production line of solid c...

Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD.
Hunan,China

Verified Supplier

Add to cart
Abrasion Proof Cemented Carbide Rods With Central Hole OEM Acceptable

... carbide round bars with outstanding production line of solid carbide rod and coolant rod.We manufactured and stocked unground and ground carbide rods for you. Standard Size List Size range(ODXIDXL mm) Detai...

Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD.
Hunan,China

Verified Supplier

Add to cart
H6 Tolerance Tungsten Carbide Rod

.... We manufacture and supplier diameter from 2 to 45 Extrusion rods, length can be as requested. Other size rods also can be produced, Offer OEM Service. Hot sale tungsten carbide rods grades: Unground/Ground...

Zhuzhou Wei Ye Cemented Carbide Co., Ltd.
Hunan,China

Verified Supplier

Add to cart
Classic Style 0.4mm 6.7m Galvanized Pipe Curtain Rod

...; the installation of the curtain rod should be horizontal, and if necessary, use a ruler to monitor the installation of the curtain rod 1, natural optional shade finial: curtain shade finial seems to be jus...

Weifang Shunyong Business And Trade Co.，Ltd
Shandong,China

Verified Supplier

Add to cart
OEM ODM Solid Carbide Rod With One Coolant Hole Long Lifespan

...Rod Our rods have different grade and right to use on different application; Specially we are produce the Nano Grain carbide (Grain＜0.2µm); Our rods are with high hardness and wear/corrosion resistance, all ...

Hunan Boyun-Dongfang Powder Metallurgy Co., Ltd
Hunan,China

Active Member

Add to cart