| Sign In | Join Free | My burrillandco.com |
|
...-2-10, IEC60695-2-11, IEC60695-2-12 IEC60695-2-13. It also conforms to the standard requirement of UL746A. This device simulates the thermal stress test of glowing component or heat source like overload resi...
...Test Apparatus Product information: It is used for resistance test to torque of cookware handle. The torsion deformation of the handle in all directions does not exceed 10°. The degree of deformation cannot ...
...Resistance Test Apparatus Product information: It is used for testing resistance to pull on cookware handles. When the handle is subjected to horizontal pull, the degree of deformation cannot affect the func...
... 62196-1:2014 clause 17.2. It is used to check the maximum force required when the test plug is withdrawn from the socket-outlet or vehicle connector and the minimum force required when the single-stage pin ...
...Testing Apparatus For Charging Plug Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, ...
...Test Apparatus Product information: The testing system is required by IEC 62368-1:2018 clause Y.5, etc. It is used to verify the protective performance of the enclosure for electronic and electrical products...
...Test Device Applied standard and clauses: This hydraulic pressure test apparatus is required by IEC 60335-2-5 cl.22.101,IEC 60335-2-7 cl.22.101 , IEC 60335-2-21/35 22.47 & 22.103 , IEC 60335-2-24 cl.22.7, et...
IEC 60309-1 Plugs And Vehicle Connectors Cable Anchorage Pull Force And Torque Test Apparatus Product information: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets...
...-1, mainly used for the lamps adjustment devices’ torsion, and bending test of the table lamps, floor lamps and the lamps which are for professional use (such as a plotter lamps). To verify adjusting devices...
...Testing Apparatus Product information: This device meets the standards of IEC60884-1 clause28.1.2 figure 40. It is applicable to test improper heating resistance and burning resistance of plug pins and plug ...
IEC 60335-1 Needle Flame Test Apparatus For Test Flammability And Fire Resistance Of Materials Product overview: The Needle Flame Tester consists of a 0.9mm needle-shaped burner that tilts with the angel of 45...
Insulation Surface Scratch Resistance Test Apparatus For Test Household Appliances IEC 60335-1 Product information The device is used to check abrasion strength of printed circuit boards or the insulating acces...
Needle Flame Test Apparatus For Testing Insulating Material As Per IEC 60695-11-5 Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped ......
IEC 60335-2-17 Clause 15.103 Spillage Test Apparatus For Electric Heating Pads Test Applicable Standards: GB4706.19-2008, Clause 15.2 and Figure 101 Household and similar electrical appliances – Safety – Partic...
Horizontal Vertical Flame Chamber Tester With Touch Screen Products information: The series of horizontal-vertical flame test apparatus are designed and manufactured according to the standard and related requir...
IEC60065:2014 clause14.1 Horizontal-vertical Flame Test Apparatus HVF-3 Standard: Conforms to IEC60065:2014 clause 14.1, 20.2.1, 20.2.4, Annex G, UL94,IEC60695-11-2, IEC60695-11-3, ......
IEC60065 Figure 8 Steel Ball Impact Test Apparatus, Drop Height 0.5-1.5m Adjustable Moreover, the non-ventilated solid areas of the enclosure that protect HAZARDOUS LIVE parts shall be subjected to a single imp...
...Test Apparatus 1. Introduction of Low Temperature Impact Test Apparatus: Low temperature impact test apparatus is designed according to IEC60884-1 clause 30.4 figure 27 & figure 42, IEC60811-1-4, VDE0620, GB...
...Test Apparatus and Gauges for 13A Plug Socket-Outlet and Adaptor Standard Number Description Figure number QTY BS1363-1 Test pin BS1363-1:1995 figure 1 1 BS1363-1 Apparatus for mechanical strength test on re...