| Sign In | Join Free | My burrillandco.com |
|
... harmonics, and it can be added to the fundamental wave in every harmonic output 3 . A wide range output of voltage and current, big power, high stability, small waveform distortion degree 4 . Strong load ab...
... (G = −10) Low power 34 mW or 6.7 mA typical for 5 V supply Output disable feature, 1.3 mA Low distortion −93 dBc second harmonic, fC = 1 MHz −108 dBc third harmonic, fC = 1 MHz DC precision 1 mV maximum inp...
...-efficiency three-phase PFC circuit topology is adopted, the power factor is greater than 0.99, and the harmonic distortion rate is ≤5%. The high-frequency switching power supply module adopts full-bridge ph...
... are higher; The new high-efficiency three-phase PFC circuit topology is adopted, the power factor is greater than 0.99, and the harmonic distortion rate is ≤5%. The high-frequency switching power supply mod...
... are higher; The new high-efficiency three-phase PFC circuit topology is adopted, the power factor is greater than 0.99, and the harmonic distortion rate is ≤5%. The high-frequency switching power supply mod...
... and reliability are higher; The new high-efficiency three-phase PFC circuit topology is adopted, the power factor is greater than 0.99, and the harmonic distortion rate is ≤5%. The high-frequency switching ...
...-stage DC-AC power frequency transformer Boost architecture, an external 12MHz crystal oscillator, to achieve high precision harmonic distortion...
... Voltage: DC14-32V Output Power: 100w*2 Output lmpedance: 4-8 Ohm Line Type: Class D Chip Selection: TDA7498 Harmonic distortion:PO=1V/0.05% Frequency range: 18-100KHZ Switching frequency: 360KHZ Signal-to-n...
... input voltage choices: 12V and 220V. The output power is 60W*2, and the output impedance is 4-8Ω. Its harmonic distortion is around 0.05%4W at 1KHz. The treble control is 10KHz at 12dB at 220mV at 47K. It...
...: 20HZ-20KHZ Harmonic distortion: 0.01% Amplification: 25 times Supply voltage: The main voltage DC double 50-100V (to add their own separate power ......
Products Description Technical parameters: Output power :650W Frequency response: +0dB/-0.8dB (20Hz~20KHz) Total harmonic distortion: <0.1% 8Ω 20Hz~20KHz Signal-to-noise ratio: (20Hz--20KHz):A weighting, full power output>98dB Transient response: 25V......
...:100W*2 Output impedance: 4 to 8. Line type: Class D Chip selection: TDA7498 Harmonic distortion: PO =1W/0.05% Frequency response range: 18-100kHz Switching frequency: 360kHz Signal to noise ratio: 110dB ......
...-stage DC-AC power frequency transformer Boost architecture, an external 12MHz crystal oscillator, to achieve high precision, and harmonic distortion is very small, 50Hz or 60Hz pure sine wave inverter ASIC....
... NAME Auto Cabin Air Filter Features Filter efficiency reach 99,9% Great dust hold capacity and very fine filter precision(0.3um) Good temperature resistsnce and anti-humiduty performance Low flow resistance...
... with micron-level accuracy. Real-time vibration damping technologies eliminate harmonic distortions during high-speed cutting, while adaptive toolpath algorithms compensate for thermal variations. The close...
...certain resonance frequency, and used to absorb the harmonic current of the corresponding frequency in the power grid. There are a large number of harmonic sources such as rectifiers, converters, and frequen...