| Sign In | Join Free | My burrillandco.com |
|
... 410 Stainless Steel coil 410 stainless proves adequate resistance to nitric acid, concentrated sulfuric acid, dilute acetic acid and naphtha. Elevated mechanical properties and corrosion resistance are achi...
... 11.5% chromium, offering both exceptional wear and corrosion resistance. SS 410 is corrosion resistant to some chemicals, food, mild acids, water, and air. It also proves adequate resistance to nitric acid,...
...ch contains 11.5% chromium, offering both exceptional wear and corrosion resistance. SS 410 is corrosion resistant to some chemicals, food, mild acids, water, and air. It also proves adequate resistance to n...
... 11.5% chromium, offering both exceptional wear and corrosion resistance. SS 410 is corrosion resistant to some chemicals, food, mild acids, water, and air. It also proves adequate resistance to nitric acid,...
... chemicals, food, mild acids, water, and air. It also proves adequate resistance to nitric acid, concentrated sulfuric acid, dilute acetic acid and naphtha. Elevated mechanical properties and corrosion resis...
...Ti, Ti-pd Sea Water, Saline Water, Mineral Water 20Cr, 18Ni, 6Mo (254SMO) Dilute Sulphuric Acid, Organic Water Solution Ni High-temp and concentration caustic soda Hastelloy (C276, D205, B2G) Concentration S...
...Ti, Ti-pd Sea Water, Saline Water, Mineral Water 20Cr, 18Ni, 6Mo (254SMO) Dilute Sulphuric Acid, Organic Water Solution Ni High-temp and concentration caustic soda Hastelloy (C276, D205, B2G) Concentration S...
... steel. It is suitable for sulfuric acid of various concentrations below 70℃. It is resistant to acetic acid of any concentration and at any temperature under normal pressure, and also has good corrosion res...
...(hazen) ≤ 25 15 Purity(m/m) ≥ 99.5 99.97 2.4-TDI % 98.5 98.84 Hydrolysable Chlorine%(m/m) ≤ 0.010 0.0010 Acidity (as HCL)(m/m)% ≤ 0.005 0.0001 Package 250kg each drum...
...: Grade name JYM-9258 Appearance Light yellow liquid Viscosity (25℃,mPa.s) 14-46 NCO % 31-33 Acid ppm HCL 0-160 Hydrolysable Chlorine 0-1500...
... Isocyanate equivalent weight 230 NCO content,% 18.3 Viscosity at 25℃, mPa.s 1500 Specific gravity at 25℃ 1.14 Acidity (as HCL) , % <0...
... SPECIFICATION Items T-100 Purity (%) Min. 99.7 Isomer Ratio 2,4- toluene diisocyanate (%) 2,6- toluene diisocyanate (%) Min. 98 Max. 2 Acidity (as HCl, ppm) Max. 20 Hydrolyzable chloride (ppm) 100±20 Total ...
... anions in water (except hydrogen) (Except for oxygen ions) to remove salt. The basic reaction equation is: RH+NaCl→RNa+HCI ROH+HCl→RCI+ H2O Commonly used ion exchange desalination systems...
... sensor C6689-A2C Used for trace O2 measurements in CO2 containing backgrounds (0.1-100% CO2). CO2 must be present. Use where acid gases are present (CO2, HCl, HCN, etc). CO2 must be...
... sensor C6689-A2C Used for trace O2 measurements in CO2 containing backgrounds (0.1-100% CO2). CO2 must be present. Use where acid gases are present (CO2, HCl, HCN, etc). CO2 must be present. A-2CXL...
Methylene Chloride 99.9% Description Top quality Appearance Colorless and clear liquid Purity, % 99.90 Moisture, % 0.010 Acidity (as HCL), % 0.0004 Chroma APHA (Pt-Co) 10 evaporated residue, % 0.0005 Solu...
... anions in water (except hydrogen) (Except for oxygen ions) to remove salt. The basic reaction equation is: RH+NaCl→RNa+HCI ROH+HCl→RCI+ H2O Commonly used ion exchange desalination systems...
... yellow liquid TDI purity (%) 99.5 minimum 2, 4-isomers content (%) 98 minimum Total Chlorine content (%) 0.01 maximum Acid Value (as per HCL%) 0.005 maximum NCO content (%) 48 minimum APHA 20...
... sensor C6689-A2C Used for trace O2 measurements in CO2 containing backgrounds (0.1-100% CO2). CO2 must be present. Use where acid gases are present (CO2, HCl, HCN, etc). CO2 must be...
... sensor C6689-A2C Used for trace O2 measurements in CO2 containing backgrounds (0.1-100% CO2). CO2 must be present. Use where acid gases are present (CO2, HCl, HCN, etc). CO2 must be...