| Sign In | Join Free | My burrillandco.com |
|
...current test set 2. Equipment Description: Automated short-time thermal test set can be applied to conduct high thermal current test for CT, circuit breaker and other primary equipment of power system.Volume...
... injection test set adopts ARM Chip to control its output process and large capacity of toroidal transformers. It is equipped with LCD display and current meter; it can show primary current value, second cur...
... set adopts ARM Chip to control its output process and large capacity of toroidal transformers. It is equipped with LCD display and current meter; it can show primary current value, second current value, tur...
... induction to convert alternating current energy of one voltage and current into alternating current energy of another or several voltages and currents of the same frequency. It is mainly composed of an iron...
...High Voltage Neutral Point Grounded Disconnect Switch for Electrical Substation About GW13 Disconnector: GW13 type main transformer neutral is alternating current 50Hz outdoor electric equipment. In the even...
.... In the event of the no bearing, it used as the transformer neutral point to connect the ground. It also can be used as the ground connecting equipment composed with the adjustable discharge gap, gap suppor...
...current clamp; Measure CT variable ratio; Measure the ratio or lag-angle of low-voltage transformer. Adopt 32 bit ARM processor, multi-channel 16 bit precision A/D convertor, high resolution TFT color LCD; I...
.../170-250V 50-60HZ 2. Short Circuit, overload, overtemperature protections 3. Output Current: 580mA 4. Output Voltage: DC20V-DC45V 5. Waterproof IP67 CE ROHS 6. Customised Service 7. 2 YEAR’S Warranty Descrip...
...transformer neutral is alternating current 50Hz outdoor electric equipment. In the event of the no bearing, it used as the transformer neutral point to connect the ground. It also can be used as the ground c...
...: RMS phase voltage:Uab,Ubc,Uca; Average value of three-phase AC voltage:/Uab,/Ubc,/Uca; Three-phase current RMS:Ia,Ib,Ic; Percentage of no-load loss and no-load current: :Po,Io%; Load loss, impeda...
...: RMS phase voltage:Uab,Ubc,Uca; Average value of three-phase AC voltage:/Uab,/Ubc,/Uca; Three-phase current RMS:Ia,Ib,Ic; Percentage of no-load loss and no-load current: :Po,Io%; Load loss, impeda...
...Current Sense Transformer Production Standard IEC185 Features: 1. Circuit requirements: a. Frequency: 50 - 60Hz b. Rated voltage: AC 660V 2. Production standard: IEC185 3. To test, control, display and recor...
...Current Sense Transformer Production Standard IEC185 Features: 1. Circuit requirements: a. Frequency: 50 - 60Hz b. Rated voltage: AC 660V 2. Production standard: IEC185 3. To test, control, display and recor...
Q13 AC Split Core Current Clamp Sensor With Analog Output 2000:1 Ratio The GFUVE Current Clamp Sensor Q13-2 is precise external AC measurement tool to work with DMMs, data loggers, power meters, power quality a...
1500/5A Resin Measuring and Protection Split Core Dry Type CT This Model is is suitable forcurrent measurement and microcomputer protection of electrical equipment in 10KV and 35KV AC power system. The transfor...
...Transformer Ratio Meter HYBC-Z 2. Equipment Description: HYBC-Z Tansformer ratio meter z type is specially designed for three- phase transformer in power system, especially for transformer of type Z winding ...
... nor device for fixing bus. And the whole iron core is secured by two clamps. This product conforms to IEC60044-1 and GB1208-2006 standard. Model Rated Current(A) Busbar Hole Dimension Rated Burden (VA)...
... nor device for fixing bus. And the whole iron core is secured by two clamps. This product conforms to IEC60044-1 and GB1208-2006 standard. Model Rated Current(A) Busbar Hole Dimension Rated Burden (VA)...
...high voltage equipment. The typical application of the HIPOT tester is as follow: 1) Power Transformer AC high voltage withstand test 2) Circuit Breaker AC high voltage withstand test 3) High voltage motors ...