| Sign In | Join Free | My burrillandco.com |
|
.... Used to check the security of parts that snap together. The spring gauge assembled in the handle can be calibrated to the neccessary force for using the instrument. This probe is make of stainless steel wi...
.... It is also used by the standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. The Rigid Test Finger was made on stainless s...
... 60950 Test Probe Kit Meets IEC 60950. Accessibility probes are used to test the size of openings to ensure that fingers and objects do not have access to hazardous parts in equipment and machinery. Safety T...
...Test Pin of IEC 61032 Figure 8 - Test Probe 12 This pin is intended to be used on appliances for verifying the inaccessibility of hazardous live parts or hazardous mechanical parts which are liable to be tou...
...Probe HT-I24 Standard:IEC60335-2-14 CI.20.102. Application:It is used to test whether the blade of hand-held stirrer is completely concealed from above and flat surface can be touched when the blade is rotat...
... of solid foreign objects having a diameter of 12.5mm or greater. Customizable: used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamom...
RF Probe RF11GSMPM Performance Item Spec Item Spec Impedance 50 Insertion Loss 0.05dB max. (DC to 3GHz) 0.25dB max. (3GHz to 6GHz) 0.35dB max. (6GHz to 11GHz) Freq Range DC11GHz Temperature Range -45+85 Co...
RF Probe RF11GSMPM Performance Item Spec Item Spec Impedance 50 Insertion Loss 0.05dB max. (DC to 3GHz) 0.25dB max. (3GHz to 6GHz) 0.35dB max. (6GHz to 11GHz) Freq Range DC11GHz Temperature Range -45+85 Co...
...Voltage Testing Set is designed and manufactured for electrical equipment very low frequency withstand voltage test. Very low frequency withstand voltage test is essentially an alternative of power frequency...
...frequency withstand voltage test. It is much smaller, lighter and portable than power frequency withstand voltage tester. It is proved home and abroad that 0.1Hz ultra-low frequency withstand voltage test ca...
DC Hipot High Voltage Generator MOA Withstand Voltage Tester I. Introduction: Portable DC High voltage generator is an important equipment for DC voltage withstand test and leakage current test of HV electrical...
...High Voltage Porcelain Capacitor 103M/2KV 10NF 2000V P7.5MM Blue Features Low loss, stable high frequency characteristics High voltage resistance, good insulation and long life Wide temperature range: -25°C~...
...High Voltage Insulation Tester Product Description: HZBP-BD series variable frequency resonant device is a common primary electrical equipment of substations. It is applied for voltage withstand test of capa...
...High-voltage Tester , Voltage Automatic Step-up Product overview: ZL-1003 wire and cable high-voltage tester used to test the insulation between line core and line core or between the line core and jacket. O...
...High Voltage Impulse Generator With Wave Shape 1,2/50 µs IEC60335-1 Clause 14 Transient overvoltages Appliances shall withstand the transient over-voltages to which they may be subjected. Compliance is check...
Small Finger Probe 8,6 Test Probe 18 of IEC 61032 Conforms to: Standard IEC61032-1997. IEC 61032 Figure 12 – Test probe 18 (small finger probe ∅ 8,6) – Finger: metal material – Handle: insulating material Techn...