| Sign In | Join Free | My burrillandco.com |
|
... Test Equipment Guide Rail Structure Single Workstation Conductor Damage Degree Test Device Standard with IEC Test Equipment: IEC60884-1 2013 clause 12.2.2, 12.3.10 and figure 11, IEC60669-1, UL486A-B Applic...
...-1, UL486A-B Application with IEC Test Equipment: This device is used to check whether terminals with screw and screwless terminals can withstand mechanical forces during normal operation. It is mainly used ...
...-1 clause 21.2, a hardened steel pin is used as a electrode during the dielectric strength test. After the scracth test, the device should work with a hipot tester to test the withstand dielectric strength o...
... combustion oil test device is designed and manufactured according to the standard requirements of IEC 62368-1: 2018 Annex S.3, IEC60950-1:2005 and IEC60950-1:2013 clause 4.6.2, Annex A.3 and etc. It is ......
...Test Device Product Info: Meet standards of GB/7000.1-2002 Chapter 4.14. And EN60598-1:2000 Function: Applied to testing adjustment device with soft cable and wire built in to check if its shares of conducto...
...Test Device Meet standards of GB/7000.1-2002 Chapter 4.14. And EN60598-1:2000 Function: Applied to testing adjustment device with soft cable and wire built in to check if its shares of conductor breakdown is...
...test device Overview This device complies with the requirements of Clause 22.16 of IEC60335-1:22.16 and GB4706.1. It is the structure for detecting automatic reel of household and similar electrical applianc...
... Test Device Complied Standards & Clauses for Charging Interface Insertion Force Test Device IEC 62196-1:2020 clause 14.1.5, 14.1.6, fig13, fig14. IEC 62196-1:2014 clause 17.2. Technical Parameters for Charg...
...Test Device Product information: The test apparatus is used to check security of lampholder contacts, avoid the lamp holder contacts shifting and the live parts of the lamp string becoming accessible which a...
... 62841-2-5 clause 17.101 Application: This device is applicable to test the closing time and mechanical strength of lower guard for circular saws. Test sample: Circular saws IEC Test Equipment Feature: The s...
...the hammer base. The test piece shall be placed horizontally, the hammer head shall face the center of the bench, the hammer handle shall fall freely after being ......
...Test Device For Explosion-Proof Products Product Information For Vertical Impact Test Device: Sample and restrictions: Cable entries for explosion-proof products. Test purpose: It is used to test the impact ...
... Test device to verify protection against spraying and splashing water; second characteristic numerals 3 and 4 (oscillating tube); Application of IPX3 IPX4 Oscillating Tube: IPX3 IPX4 Oscillating Tube Test...
... for the pull force test of clip-mounted luminaires. Test requirements: 1). A pull is applied on the cable without jerk for 1 min in the most unfavourable direction in normal use. During the test the clip is...
Thermal Insulation Rock Wool Thermal Load Test Device First, the scope of use The thermal insulation rock wool thermal load test device is a test device developed according to the technical conditions stipulate...
...Test Device Products Introduction: The drop test device is specially designed and manufactured according to IEC 60335-2-4 (par. 21.101) and IEC 60335-2-7 (par. 21.101.1). It is used for detect the impact-res...
... metal inorganic film or organic film test, such as: electroplating, anode processing, conversion coating, painting, ect. Standards: Characteristics: 1. LCD display and a pid controller or touch screen ......
... to test the bending moment and force moment of rigid suspension brackets under the effect of certain force. Test requirements: - For heavy-duty brackets (for example workshop brackets), a force of 40 N shal...
...Test Drying Rate Testing Device For Hair Dryer With PLC Control IEC 61855 Product Information For Drying Rate Testing Device For Hair Dryer: This test system is based on the requirements of the IEC61855 Figu...
...) for fluorescent lamps according to IEC60598-1 clause 4.4.4. It is applied to assess the fixing device of lamhpolder should have adequate mechanical strength so as to withstand rough handling as may be expe...