| Sign In | Join Free | My burrillandco.com |
|
... phase 110/220V Single phase 110/220V Single phase Rated Power(KW) 0.4 0.8 1.2 1.6 2.4 Working Pressure ≤0.2 Mpa ≤0.2 Mpa ≤0.2 Mpa ≤0.2 Mpa ≤0.2 Mpa Gas Output ±10% 0-100L/H 0-200L/H 0-300L/H 0-400L/H 0-......
... phase 110/220V Single phase 110/220V Single phase Rated Power(KW) 0.4 0.8 1.2 1.6 2.4 Working Pressure ≤0.2 Mpa ≤0.2 Mpa ≤0.2 Mpa ≤0.2 Mpa ≤0.2 Mpa Gas Output ±10% 0-100L/H 0-200L/H 0-300L/H 0-400L/H 0-......
...Fuel Cells & Redox Flow Batteries Product Overview Shenzhen Xinhaisen Technology Limited specializes in high-precision chemical etching for metal parts. Our etched bipolar plates are manufactured using advan...
Beside supply of hydrogen fuel cell component GDL and PEM. We also have the ability to provide the GDL&PEM production lines, we can offer the production line equipment and provide technical support. GDL product...
...applicable waterproof device count. Flashlight mode: The flashlight is illuminated at the front end of the handle, which is convenient to use; Power supply: energy-saving design, this machine uses rechargeab...
The following test options are available: Gas mixtures: Hydrogen-nitrogen mixture Electric gas preheater or gas-to-gas preheater Synthetic mixture: Gas infeed (CO, CO2, H2, N2) Gas humidification Elec...
We offer tailored test environments of varying complexity for your stack module. The basic test environment uses a gas mixture of some hydrogen in nitrogen, which is available on request and brought up to opera...
...Fuel Cell Test Fixture Seals For ASC Single Cell Testing Dimensions: 11.5 cm x 11.5 cm Outer Perimeter 10 cm x 10 cm Inner Perimeter Typical testing ramp rate is more dependent on the cell rather than the se...
...Hydrogen Fuel Cell Industries Served Photo etched components are used across markets where precision, repeatability, and clean edge profiles are required. This manufacturer supports: Aerospace and defense sy...
... 3 One-stop system supply TECHNICAL: 1 Performance classes: 0.5-1 kW, 1-3 kW, 2-5 kW (tailored to power performance of stack module) 2 Operating gases: Natural gas, biogas (synthetic where required), methane...
... Mechanical Strength SOFC Fuel Cell LSCF Cathode Material 400μm Anode Supported Cell Anode: 115mm×115mm NiO-YSZ ~400μm Electrolyte: 115mm×115mm YSZ 10-14μm Cathode: 100mm×100mm LSCF-GDC ~50μm Huatsing-power,...
... an ASC, you receive an optimal balance of membrane and ionic function by using a very thin electrolyte. Huatsing-power, the company which the first researches, develops and produces SOFC related products in...
...: 2.5V Working Current: 42A DC Working temperature: 20°c~45 °c PEM: DuPont membrane with catalyst coated Note: Power supply is not provided. 2. Detail of electrolyzer Cell stack:...
...-performance 32-bit embedded processor with powerful processing capability; Project Indicators and Parameters Alcohol sensor type Electrochemical fuel cell alcohol sensor Range: 0mg/100ml~630mg/100ml (breath...
...: 2.5V Working Current: 42A DC Working temperature: 20°c~45 °c PEM: DuPont membrane with catalyst coated Note: Power supply is not provided. 2. Detail of electrolyzer Cell stack:...
...: 2.5V Working Current: 42A DC Working temperature: 20°c~45 °c PEM: DuPont membrane with catalyst coated Note: Power supply is not provided. 2. Detail of electrolyzer Cell stack:...
...-critical operations, this platform combines the high energy density of hydrogen with a sophisticated dual-power supply mode, offering unprecedented endurance that traditional battery-powered UAVs cannot mat...
...-Module For Gas Leak Detection In Fuel Cell Systems Sensing Principle: It is a catalytic type gas sensor, which detects gas concentration through the catalytic reaction of the sensor element. Target Gases: H...
...Fuel Cell Equipment With Electric Preheaters Multi-Level Safety System Test range:1-5kW PLC closed-loop control to provide safe and stable operation WIN-HSTM control and simulation software I/O interface and...
...Fuel Cell Test System Natural Gas / Biogas Operating SOFC stack operation can also be tested using hydrocarbons. This may involve the creation of synthetic reformate mixtures or the integration of reforming ...