| Sign In | Join Free | My burrillandco.com |
|
...Testing Equipment Multifunctional Tester For Plug Cords Product information: This test device is a multifunctional tester for plug cords or power cables. It is used for a comprehensive test of electrical cha...
... whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the mandrel s...
... of completed flexible cables. This cable tester consists of a carrier C (see IEC60245-2 Figure 1),a driving system for the carrier and four pulleys for each sample of cable to be tested. The...
...places: quality control, laboratories, etc.During the test, the flexible wire is wound on the trolley of the machine, the two ends are fixed with weights, and a certain current is passed according to the sta...
... the needs of various industries requiring precise and reliable immersion testing. With a power rating of 100W, this immersion soaking test chamber is equipped to handle rigorous testing procedures with ease...
...Testing Equipments Detailed Product Description Function: Edge And Ring Crush Strength Test .Application: Edge Crush Strength Test Sensor Method: LOAD CELL Force Sensor Capacity: 200KG Unit Change: Kg/N/Lb R...
...Test Equipment Motor - Driven Drop Test Apparatus with 1000mm fall height 1. Introdouction Drop test apparatus/bump test apparatus is designed according to IEC60950 clause 4.2.6 and IEC60065 clause 12.1.5, a...
...Testing Equipment for GWIT and GWFI Testing 1. Introduction of Glow Wire Flammability Testing Machine Glow wire flammability testing equipment is an electrical safety test designed to evaluate the flame resi...
... Tensile Testing Equipment 50-500mm/min Product Description Material Tensile Testing Equipment Tensile Tester Machine UTM 1. Material Tensile/ Flexing/Tearing Strength Testing Equipment/Machine Usage: Tensil...
...Climatic loads clause 5.10 dust test; ISO 20653-2013 Road vehicles — Degrees of protection (IP code) — Protection of electrical equipment against foreign objects, water and access, figure 1- Principle test s...
... of a rear-view mirror collision test rig subjected to a non-repetitive mechanical impact environment. In the process of use and transportation, the simulation equipment and related components may encounter ...
...Test Equipment IEC60068 Products Introduction: The hot and cold impact test machine is to test whether the product has a bad impact due to the rapid changes of high and low temperature without moving the ite...
...Test Equipment IEC60068 Products Introduction: The hot and cold impact test machine is to test whether the product has a bad impact due to the rapid changes of high and low temperature without moving the ite...
... Tensile Testing Equipment 50-500mm/min Product Description Material Tensile Testing Equipment Tensile Tester Machine UTM 1. Material Tensile/ Flexing/Tearing Strength Testing Equipment/Machine Usage: Tensil...
...Testing Equipments Detailed Product Description Function: Edge And Ring Crush Strength Test .Application: Edge Crush Strength Test Sensor Method: LOAD CELL Force Sensor Capacity: 200KG Unit Change: Kg/N/Lb R...
...Testing Equipment for IPX2 Testing 1. Introduction The IPX2 waterproof testing equipment request Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from...
... clause 8.8, GB9706.1-2007 clause 21, IEC60601-1:2020 clause 9.4.4, GB9706.1-2007 clause 21 and IEC61010-1 clause 7.5.2. It’s applied to test the strength of handle or grip for lifting or carrying the equipm...
... equipment is equipped with advanced features to meet your testing needs with precision and efficiency. The IP test chamber is constructed with high-quality door material made of tempering glass, ensuring du...
..., after achieved the required rotation, evaluate the pilling degree of the specimen. Also applies to GB/T13775, ASTM D4966, ISO12947 and other fabric wear test. The theory: circular fabric sample at a certai...
..., after achieved the required rotation, evaluate the pilling degree of the specimen. Also applies to GB/T13775, ASTM D4966, ISO12947 and other fabric wear test. The theory: circular fabric sample at a certai...