| Sign In | Join Free | My burrillandco.com |
|
.... Application This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and el...
...Testing Equipment for Automotive AC Compressor The automatic helium leak vacuum chamber detection system is suitable for automotive air-conditioning compressor air-tightness testing, but also suitable for te...
... of protection provided by enclosures (IP Code)>>, used To Test Waterproof Performance of the electrical products which second characteristic is numeral 5/6. This machine is suitable for enclosure protection...
...Test Apparatus Touch Screen Operation IEC60695 Flammability Test Equipment Products Introduction This device is manufactured according to the standard of IEC60695-2-10, IEC60695-2-13. It also conforms to the...
...Waterproof Degrees Test Equipment Standard:IEC60529 degree of protection provided by enclosures (IP Code) of the IPX1 and IPX2, IEC60884-1, IEC60335-1, IEC60598-1. Application:It is used for the testing of I...
...Test Equipment salt spray testing machine 2000x800x600mm Application: The salt spray test machine is used for the surface treatment of various materials, including coatings, electroplating, organic and inorg...
...: 13.2 Test conditions for first characteristic numerals 1 , 2, 3, 4 The object probe is pushed against any openings of the enclosure with the force specified in table 7. 13.3 Acceptance conditions for first...
... as specified in 1 4.2.1 adjusted to provide the water flow rate specified in table 8. The table on which the enclosure is placed does not turn as in the case of the test for the second characteristic numera...
...Test Product information This battery forced internal short-circuit tester is an integral testing equipment to performance a comprehensive test for temperature, voltage, internal-short circuit, which is appl...
IEC 60227-1 Cable Testing Equipment Bending Test Apparatus With 60 Per Minute Flexing Rate IEC60227-2 clause 3.2 Bending test: The requirements are given in 5.6.3.2 of IEC 60227-1. A sample of cord of appropria...
... 60745-2-5 Figure 110 IEC Test Equipment Test Probe B With 12mm Diameter IEC60745-2-5 clause 19.101.2.4 For checking the accessibility of the cutting edge zone at the front of the saw above the guide plate, ...
...Test Equipment, 500L Water Tank Nowadays, there are more and more electronic products used outdoors, and waterproof test is a very important link for products, because only after waterproof test can we have...
... – Part 1: General requirements; Uses: The switch of fixed electrical devices for household and similar purposes is used for on-off capacity and normal operating life test, and...
IEC60335-2-9 Home Appliance Testing Equipment Aluminum Vessel for Drop Test Vessel For Drop Test procedure: The vessel uniformly filled with at least 1,3 kg of sand or shot so that the total mass is 1,80 kg 0...
..., IEC60884-1, IEC60335-1, IEC60598-1. Application:Primarily utilized for IPX7 testing, it further facilitates automated water and electrical control during IPX1 to IPX6 waterproof evaluations. Test sample:Th...
IEC60335-2-9 Base Flat Diameter 120mm10mm Home Appliance Testing Equipment Aluminum Vessel for Drop Test Vessel For Drop Test procedure: The vessel uniformly filled with at least 1,3 kg of sand or shot so that...
...Test Equipment with Arc Detection Function 1. Introduction Insulation and withstand voltage tester is a kind of electric safety test equipment, widely used in the fields of transformer, equipment, components...
...Testing Equipment Main function: BT-2021A prism core pairing reinspection machine, the main function is the whole set of cores has been paired, put into the machine at one time, and secondary pairing re-insp...
...Testing Equipment for mobilephone click lineation life testing Name Mobilephone testing machine for mobilephone click lineation life testing Function Testing durability and lifetime of touching screen of mob...
...Testing Equipment Standard: IEC60695-11-3 ‘Fire hazard testing – Part 11-3: Test flames – 500 W flames – Apparatus and confirmational test Methods’; IEC60695-11-4 ‘Fire hazard testing – Part 11-4: Test flame...