| Sign In | Join Free | My burrillandco.com |
|
...Specification Item Value Brand Name ZKTD Application Sensor, Inertial Navigation, instrument Shape Round Chemical Composition 99.999% fused silica Product Name Flexible Beam Quartz Pendulum Color Clear Trans...
...millimeters of Arabic numerals, web, flange thickness, web thickness and flange width different specifications with the waist height (h)× leg width (b)× waist thickness (d1)× flange thickness (d2) millimetre...
IN-Z6 5kg to 1t Single Ended silo Load Cell for silo scale Stainless Steel Single Ended Silo Load Cells Welded On Bellows Off Center Compensated for silo scale Feature -welded-on bellows -normally loads: 5kg-1t...
Products Description: GCT/GCL series trolley ,running on the bottom flange of monorail, is hand-operated by pulling hand chain. Attached with chain hoist it can form a trolley type chain hoist which is used wid...
Products Description: GCT/GCL series trolley ,running on the bottom flange of monorail, is hand-operated by pushing load lifed of pulling hand chain. Attached with chain hoist it can form a trolley type chain h...
Products Description: GCT/GCL series trolley ,running on the bottom flange of monorail, is hand-operated by pushing load lifed of pulling hand chain. Attached with chain hoist it can form a trolley type chain h...
...Beam Moulds Concrete Testing Equipment Standard: EN 12390-1, 12390-2; BS 1881; ASTM C31, C78, C192, C293; AASHTO T23, T97, T126, T177 Description: We provide wide range of high quality concrete specimens mou...
...Beam Moulds Concrete Testing Equipment Standard: EN 12390-1, 12390-2; BS 1881; ASTM C31, C78, C192, C293; AASHTO T23, T97, T126, T177 Description: We provide wide range of high quality concrete specimens mou...
...Beam Moulds Concrete Testing Equipment Standard: EN 12390-1, 12390-2; BS 1881; ASTM C31, C78, C192, C293; AASHTO T23, T97, T126, T177 Description: We provide wide range of high quality concrete specimens mou...
...specifications Beam clamp jaws clamp Girder clamp Beam Clamp is made of malleable iron or Ductile Iron construction, also known as a beam hanger or girder clamp, is a mechanical device used to attach or susp...
...beam and wide parallel-legged I-beam (H-beam). The waist width of our hot-rolled ordinary I-beam is 100-630mm, denoted as No.10 to No.63, and the slope of the inner wall of the leg is 1:6. The hole system of...
...beams are mainly divided into ordinary I-beams, light I-beams and wide flange I-beams. According to the flange and web height ratio is divided into wide, medium, narrow wide flange I-beam. The former two are...
...High-power 20w single color IP65 led outdoor spot light with Multiple beam angles ♦♦ Specification Model XH-FTG140M Storage Temperature -40℃-60℃ Operating Temperature -40℃-60℃ Beam Angle(°) 8°15°25°30°45°60°...
Outdoor waterproof Multiple beam angles IP65 3w Garden light outdoor led spotlight led floodlight ♦♦ Specification Model XH-YTG100M Storage Temperature -40℃-60℃ Operating Temperature -40℃-60℃ Beam Angle(°) 5°10...
... W Beam Highway Guardrail Beam Roll Forming Machine Specifications: Item: Specification: Notes: 1.Information of raw material Suitable material: Galvanized coil Width: 748 mm Thickness: 2.5-3.5mm Yield stren...
... W Beam Highway Guardrail Beam Roll Forming Machine Specifications: Item: Specification: Notes: 1.Information of raw material Suitable material: Galvanized coil Width: 748 mm Thickness: 2.5-3.5mm Yield stren...
QC12K-104000 Manual Sheet Metal Cutting Machine Cutting Machine Metal Mini Metal Cutting Machine Specifications The shearing machine with both front and back gauge With heavier weight, good stability High car...
...Beam AAS Atomic Absorption Spectrophotometer Introduction of Atomic Absorption Spectrophotometer Atomic absorption spectroscopy (AAS) is based upon the principle that free atoms in the ground state can absor...
...Beams For Concrete Formwork Beam LVL timber H20 is an important component of international construction formwork system, can be used in any formwrok system. We supply top quality H20 beam, our products are w...
... are made primarily from carbon and iron, with a low to high carbon content. Carbon steel H beams are typically produced by hot rolling, which involves passing heated steel through rollers to create the desi...