| Sign In | Join Free | My burrillandco.com |
|
... to IEC61032 figure 5, meet the requirement of IEC60529-IP. The diameter of the sphere is 50mm+0.05. Test probe 1 is for IP1X testing, it means for the protection against solid foreign objects of Φ50mm or gr...
IEC 60331 Wire and Cable Fire-resistance Impact Testing Equipment Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire resistance of cable wiring or power grid, burning in not l...
... clause 8.1, IEC61010-1 clause 6.2.2 and Figure B.1, IEC60884-1 clause 10.1, AS/NZS3112 clause 3.14.12.4 and Appendix K3 requirements. It is used to test the protection of human body from touching dangerous ...
... strength of cartons or other packaging containers. It is used to determine the compressive strength of cartons, and can be used for steady pressure tests and crush tests. The results of the tests can be use...
...Test Finger Probe Young Adult Arm Probe Stainless Steel Probe Standard description Our product of Test Finger Probe (see Figure 1)shall not to be able to make contact with the hazardous moving parts when it ...
...Testing Equipment Horizontal-Vertical Flame Chamber Tester Brief Introduction Horizontal Burning Test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210,GB/T 2408 50W Vertical Burning Test :UL94 V0,V1,V2,IEC 60695-11-...
...Testing Equipment 1.50 /500 W flames tester Brief Introduction Horizontal Burning Test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210 50W Vertical Burning Test :UL94 V0,V1,V2,IEC 60695-11-10,ISO 1210,IEC 60695-11-...
...5mm or greater. Test sample:Easily accessible enclosure live parts or mechanical parts. Feature:Steel ball, rigid test. Parameters: Model HT-I06 HT-I06T Name Test probe 2 steel ball Test probe 2 steel ball w...
Test Thorn Probe HT-I16 Standard:IEC61032 test probe 41 figure 16 and IEC60335. Application:It is intended to verify the protection against access to glowing heating elements. Test sample:Easily accessible encl...
...13.6.2, Annex M.4.2, M.4.4.4, Annex. P.4, Annex T.8, IEC60950:2013 clause 2.10.8.2, clause 4.2.7, clause 4.5.5, clause 4.7.3.2, IEC 60695-10-3 etc. Features: 1. The drying oven must be good grounded to ensur...
... of general electrical safety standards. ■5.7 LCD display with blue background, displaying data are intuitive and clear. ■Up to 200 groups of test conditions are memorized, each group has 8 test steps, and e...
IEC 62368-1 Annex U Cathode Ray Tubes Mechanical Strength And Explosion Proof Test Apparatus Product information: Standard:Confirm to IEC 62368-1:2018 Annex U, IEC 60950-1:2013 clause 4.2.8, IEC60065:2014 claus...
... method of protective conductor current, (Figure 4-mesuring network touch current weighted (sensory current or reaction current), it is required by IEC 62368-1:2018 clause 5.2.2.2, IEC 60335-1 clause 13.2, I...
...Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT” IEC 60068-2-14:1984 "Basic environmental testing procedures-Part 2: Tests-Test N: Change of temperature, IDT" IEC 60068-2-30:2005 “Environmental T...
.... It is used to simulate the children who are older than 36 months and younger than 14 years to test whether the hazardous parts can be touched. Children finger probe HT-I13 conforms to IEC61032 figure 13 fi...
...Operated Impact Hammer for IEC60068-2-75 IEC Test Equipment Standard: IEC 60068-2-75 Environmental testing –Part 2-75: Tests – Test Eh: Hammer tests. IEC 60065, IEC60335-1, IEC60598-1 and etc. IEC Test Equip...
... bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is suitable for circular wire and cab...
... requirements of IEC 62368-1:2018 clause Y.2 and Annex C, etc. It is with imported Q-LAB water-cooled xenon-arc lamp, spectral irradiance 0.3W/m2~1.1 W/......
IEC 62368-1 Clause Y.5.3 Water Spray Test Apparatus 5 Psi For Lamps Manual Control Product Information: The Water Spray Test Apparatus conforms to the standard requirements of IEC 62368-1:2018 clause Y.5.3, UL1...
.... It belongs to the IEC 60695 series of standards "Tests for the assessment of fire hazard" and includes the standard parts 2-10, 2-11, 2-12, and 2-13. IEC 60695-2-10 – Glow wire test equipment and general t...