| Sign In | Join Free | My burrillandco.com |
|
IEC60950-1 Hot Wire Ignition Tester, Annealing Time 8s-12s, Power 0.26W/mm±4% M.1 Hot wire ignition test M.1.1 Five samples of each material shall be tested. The samples shall be 1 50 mm long by 1 3 mm wide, an...
Automatic Ignitability / Flammability Tester for Building Materials Application: Building Materials Ignitability Tester, to determine the ignitability of building products subjected to direct impingement of ver...
...Tester Overview:DX8602 ignition temperature tester is designed and manufactured in accordance with GB4610-2008 "Determination of Ignition Temperature of Plastic Hot Air Furnace Method" and GB/T9343...
...refrigerant hot surface ignition temperature tester determines the lowest temperature at which A2L refrigerant can be ignited by a high-temperature hot surface under specific conditions; this is known as the...
...Tester, IEC60695-11-5 Flammability Testing Equipment Introduction Needle Flame Tester is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695 -11...
...Tester, IEC60695-11-5 Flammability Testing Equipment Introduction Needle Flame Tester is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695 -11...
...Ignition Tester Standard: IEC60950-1 ,IEC60947-1:2011,IEC60695-2-20. Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulate...
...placed above the burner. The burner produces a flame that meets the specified height to ignite the sample. After the specified ignition time, the sample is measured Parameters such as continuous burning, smo...
...Igniter 45 Degree Flammability Tester for Fabric Flammability Test 35 kg Application 45 Degree Flammability Tester: This tester is used finding out the material flammability (fabric burning test) under contr...
...tester Description: 45 degree flammability tester, check the flammable performance of the textile Stainless testing room with glass window,after ignition automatic time (0.01 second precision) automatic or m...
...Tester CRF 16-1610 Product Information 45 degree flammability tester, check the flammable performance of the textile Stainless testing room with glass window, after ignition automatic time (0.01 second preci...
High Current Arc Ignition Tester HAI-1 Products Introduction This device conforms to standard requirements of UL 746A, UL746C, UL 498 clause 114, IEC 60950-1, BS EN 60950-1, BS 7002, etc. It is suitable for arc...
... that used to cover on the bed of the flame retardant performance; This test method is use the standardize flame to burn the sample surface within the prescribed time, observing the...
Building Material Combustion Tester Stainless Steel Ignitability Apparatus ISO 11925 Flammability Tester ISO 11925 Stainless Steel Building Material Combustion Tester Lgnitability Testing Machine 1. Technical s...
...D1929 Ignition Temperature Testing Equipment For Plastic Sample Intruduction Plastic ignition temperature tester according to GB4610-2008 plastic hot air furnace method of determining the ignition temperatur...
.... Flash point and auto-ignition point tester for measuring the temperature of the plastic flash fire and auto-ignition temperature, which is convenient to evaluate plastic ignition performance. This tester i...
... test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time. Test sample:Information technology equipment, low vo...
... properties of vertically oriented specimens. It is also applicable to all kinds of textile material of flammability test; Technical parameters The ignition time setting range 0 ~ 99.99 s The combustion timi...
... spread properties of vertically oriented specimens. It is also applicable to all kinds of textile material of flammability test; Specifications The ignition time setting range 0 ~ 99.99 s The combustion tim...
...requirements of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat source...