| Sign In | Join Free | My burrillandco.com |
|
...TEST DC High voltage power supply+Capacitor+Sphere gap XHHV508-4+XHCC-8/15+XHJX-35 The high-frequency DC high-voltage power supply+capacitor and sphere gap is mainly used for impulse discharge during fault t...
... transformer are installed inside, which can truly achieve the effect of not being damaged by impact, and it also has the functions of automatic timing impact, manual impact and withstand voltage test. This ...
...voltage pulse generator can be used impulse discharge and withstand voltage test in low and high voltage cable fault test. High-precision test cable fault sampling waveform module and small transformer are i...
...TEST cable fault location system is designed for 35kV and below underground cable fault detection. ★Cable fault pre-location: with the reflectometer XHGG502 based on the low-voltage impulse reflection method...
...voltage surge generator XHHV535-4T is mainly used for underground cable fault test of voltage level of 35kV and below; And the torlley high voltage impulse generator can also be used for DC withstand voltage...
10KV Impulse Withstand Voltage Generator 1.2μs/50μs Voltage Wave 1. Introduction The impulse withstand voltage generator is a voltage wave tester with a waveform of 1.2μs/50μs. The frontier time is 1.2μs and th...
...Impulse Test Generator 25KV Transient Over Voltage Of Components Product Information: Standard: Conforms to IEC60335-2-76 clause 14. Application: It is used to detect the transient over voltage of the compon...
...Test System with Advanced Temperature Control & Monitoring Testing Applications: Type testing cable samples to meet the requirements of major international standards (I.e., IEC, IEEE, IPCEA, AEIC, VDE, EDF)....
...the torlley high voltage impulse generator can also be used for DC withstand voltage test of other electrical equipment. The device integrates DC high voltage source, energy storage capacitor and discharge b...
...Test System Testing Applications: Type testing of cable samples is performed in accordance with all applicable international standards, including IEC, IEEE, IPCEA, AEIC, VDE, and EDF. Cable samples and acces...
...Test System Thermal Cycling Test Equipment For Cables Testing Applications: Conducting cable type tests in full compliance with international standards (e.g., IEC, IEEE, IPCEA, AEIC, VDE, EDF). Performing in...
..., VDE, EDF). • Inductively heating cable samples and associated accessories. • Simultaneously energizing heated cables with DC/AC high voltage and impulse voltage. • Facilitating these functions via built-in...
Impulse Test Generator Test Equipment EVSE Testing Equipment Circuit 1 7KV Complied Standards & Clauses Conform to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, Annex G.10, circuit 1 of Table D.1, etc. and ...
...low and high-voltage cables. This device integrates a DC high-voltage source, energy storage capacitor, discharge ball device, automatic discharge device, and voltage level switching device into a single tro...
...Test Equipment Cable Load Cycling Test System Testing Applications: 1: Perform type testing of a cable sample in accordance with applicable international standards (IEC, IEEE, IPCEA, AEIC, VDE, EDF). 2: Perf...
... is subjected to transient voltages and surges during their normal operation when the insulation under test breaks down. To withstand these impulse voltages,the insulation of these transformers must be caref...
...test whether the battery will explode and catch fire when a certain resistance is short-circuited. At the same time, the relevant instrument displays the maximum current of its short-circuit. Standard: GB/T ...
... 13.3.4 b), 14.2, IEC60950, and etc. Application: It is used to detect the transient over voltage of the components and the electrical clearance and the creepage distance. Test sample: Household appliance, A...
... power supply: AC 220V±10%/50Hz±2Hz(60Hz) Ambient temperature:-20~+50℃ The XHHV510-10L high-voltage pulse generator is mainly used for shock discharge during...