| Sign In | Join Free | My burrillandco.com |
|
Portable Transformer Sweep Frequency Response Analyzer SFRA20 Main Features 1. Characteristics of transformer windings are measured with frequency sweep method. Deformations of windings such as distortion, swel...
Portable Transformer Sweep Frequency Response Analyzer SFRA20 Main Features 1. Characteristics of transformer windings are measured with frequency sweep method. Deformations of windings such as distortion, swel...
IEC60335-1 Clause 22.16 Automatic Cord Reels Endurance Tester / Cord winding test device Overview This device complies with the requirements of Clause 22.16 of IEC60335-1:22.16 and GB4706.1. It is the structure...
...Tester Double Channel product introdution This instrument is based on IEC60335-1 clause 11 Household and similar electrical appliances-safety-Part 1:General requirements. It can replace the traditional way o...
.../ humidity/wind and any other climatic changes. This aging tester mainly for the test of non-ferrous/ organic/ rubber/plastic and building materials. It can provide data for user to evaluate the products' pr...
... inserting machine, end insulation board inserting machine, needle winding machine, stator tester, tracing system and belt conveyor. Operator fill material, each process is completed automatically, automatic...
High Accuracy ZXR -100A Transformer Testing Equipment Dc Winding Resistance Test ZXR-100A Transformer Winding Resistance Tester adopts the new power technology, small volume, light weight, large output current,...
...Winding Deformation Displacement Distortion Tester I. Introduction: Our company has designed the frequency response analyzer SFRA-II, which can use two methods to detect the deformation of the transformer at...
ZXR -100A High Accuracy Transformer DC Winding Resistance Test The DC Winding resistance is the transformers semi-finished product, finished product test, installation, commissioning test, and electric part pr...
Product Description: Metal Wire Torsion And Wrapping Testing Machine is a kind of new digital display type metal wire torsion and winding testing machine developed by our company. It is horizontal structure, wh...
OLTC 35kv Oil Immersed Power Transformer / Three Phase Distribution Transforemer General The SFZ series Oil-immersed type transformer features low noise, low loss, rational structure, high quality material, sci...
Parameter No. MAIN TECHNICAL DATA Unit 1 Rated Voltage kV 12 2 Lightning Impulse Withstand Voltage (Peak) kV 75 3 Short-time (1min) Power-frequency Withstand Voltage kV 42 4 Rated Frequency Hz 50/60 5 Rated Cur...
XHZ1320 For the power system, the transformer is the core equipment in the system, so the long-term and reliable operation of the transformer is related to the stability and reliability of the entire system. Th...
XHYZ1668A Product Introduction The XHYZ1668A on-load tap-changer is the only moving part connected to the transformer circuit, so the detection of the on-load tap-changer has attracted more and more attention. ...
... to test three-phase transformers of the power electric system, especially suitable for the testing of Z type winding transformer and rectifier transformer, as well as the Scott, inverse Scott and balancing ...
... Ratio Tester Product Description Multifunctional Transformer Transformation Ratio & Group Tester can be used to test three-phase transformers of the power electric system, especially suitable for the testin...
... Used to test the resilience of enameled round wires with nominal diameter of conductor above 0.080mm and below 1.600mm 32-bit ARM control system Winding 5 turns automatically stop All...