Total 28816 products for introduction of stepper motor Manufacture & Suppliers

• 5V 5mm Diameter Micro Linear Stepper Motor With Gearbox

  

  ...stepper motor with gearbox and slider This motor is a 5mm diameter stepper motor, attached with 20.25:1 gear ratio gearbox. This is a linear stepper motor, and the lead screw pitch 0.4mm, and it has 6 starts...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• High Precision 3V Micro Gear Stepper Motor 2 Phase 4 Wire With Gear Box

  

  ...the motor is 10mm, the resistance of each phase of the motor is 18Ω, the step angle is 18 °, and each revolution is 20 steps. The wiring type is lead, and there are 4 wires (red, white, black, brown) for the...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Mini Slider Screw Permanent Magnet Linear Stepper Motor For Camera Lens

  

  ...4mm of the screw, through the screw and the screw rod supporting the turn of the screw into a thrust. Motor basic step angle is 18 degrees, the motor running 20 steps every week, so the resolution of displac...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 2 Phase 10mm Micro Linear Slider Screw Stepper Motor 3.3V DC For Door Locks

  

  ...4mm of the screw, through the screw and the screw rod supporting the turn of the screw into a thrust. Motor basic step angle is 18 degrees, the motor running 20 steps every week, so the resolution of displac...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• SM20-35L 2 Phase 20mm Miniature Slider Screw Stepper Motor 12V DC Pm Stepper Motor

  

  ...stepper motor 12V DC pm stepper motor SM20-35L is a precision screw motor with a pitch of 0.4mm between the output shaft and the screw. The rotation of the screw and the screw support the screw to generate t...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 18 Degree Step Angle Screw Bipolar Drive Micro Stepper Motor 10mm

  

  ...stepper motor voltage 5V DC 18° step angle screw stepper motor 10mm micro stepper motor VSM1063 is a precision lead screw motor ,the output shaft with a pitch of 1.2mm of the screw, through the screw and the...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• SM15-45L Permanent Magnet Slider Screw Stepper Motor 18 Degree Pm Stepper Motor

  

  ...stepper motor 6V DC pm stepper motor SM15-45L is a precision screw motor. The pitch between the output shaft and the screw is 0.4mm. The rotation of the screw and the screw supports the screw to generate thr...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Bipolar Drive 400 mA Screw Slider Stepper Motor 6V DC Pm Micro Stepper Motor

  

  ...stepper motor 6V DC pm micro stepper motor SM15-45L-S is a precision screw motor. The pitch between the output shaft and the screw is 0.4mm. The rotation of the screw and the screw supports the screw to gene...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 2 Phase 15mm Miniature Slider Screw Stepper Motor 9V DC Pm Stepper Motor

  

  ... linear screw nut slider, the screw and the rotation of the screw support the screw to generate thrust. The basic step angle of the motor is 18, the motor runs 20 steps per week, and the displacement resolut...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• FPC Micro Linear 2 Phase PM Stepper Motor 8mm 5V

  

  ...stepper motor 5V linear stepper motor 2 phase PM Stepper Motor VSM0810 is a precision micro stepping motor body outer diameter 8MM, body length 8.2MM, shaft outer diameter 1MM, the shaft length can be change...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 8mm Micro Stepper Motor 2 Phase 5V 18 Degree Step Angle Pm Stepper Motor

  

  ...stepper motor 2 phase 5V18 degree step angle pm stepper motor​ VSM08248 is a precision lead screw motor ,the output shaft with a pitch of 0.4mm of the screw, through the screw and the screw rod supporting th...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 15mm 5v Lead Screw Stepper Motor 45mm Effective Stroke Linear Actuator

  

  Stepper Motor Manufacturer 15mm 5v Lead Screw Stepper Motor 45mm Effective Stroke Linear Actuator Micro Stepper Motor SM15-45L is a precision micro step motor, the output shaft with a pitch of 0.5mm of the scre...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 8mm 2 phases 18 Degrees CW / CCW Rotation Micro Stepper Motor With Two Phase for Intelligent Security Products

  

  ...stepper motor screw stepper motor with bracket 2 phase 4 wire stepper motor VSM08102 is a precision micro step motor, the output shaft with a pitch of 0.4mm of the screw, through the screw and the screw rod ...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 10mm Micro Slider Linear Stepper Motor 3.0 V DC With Pin Type

  

  ...stepper motor screw stepper motor with bracket 2 phase 4 wire stepper motor VSM1069 is a precision micro step motor, the output shaft with a pitch of 0.4mm of the screw, through the screw and the screw rod s...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 2 phases Weight 4 g Permanent Magnet 8mm Micro Slider Stepper Motor With Mounting Bracket

  

  ...stepper motor screw stepper motor with bracket 2 phase 4 wire stepper motor VSM0806 is a precision micro step motor, the output shaft with a pitch of 0.4mm of the screw, through the screw and the screw rod s...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 10mm Micro Slider Screw Stepper Motor With Bracket 2 Phase 4 Wire

  

  ...stepper motor screw stepper motor with bracket 2 phase 4 wire stepper motor VSM1065 is a precision micro step motor, the output shaft with a pitch of 0.4mm of the screw, through the screw and the screw rod s...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 9V DC Pm stepper motor 15mm miniature stepper motor with linear screw nut slider for DIY engraving machine

  

  ... and the lead screw is 0.4mm. The screw and the rotation of the screw support the screw to generate thrust. The basic step angle of the motor is 18 degrees, the motor runs 20 steps per week, and the displace...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 18 degree Step Angle Dc 5v Gear Reducer Stepper Motor 15mm For Fiber Fusion Splice

  

  ...Stepper Motor 15mm Dc Stepper Motor With Gearbox GM12-15BY For Fiber Fusion Splice SM10 motor worm gearbox is the use of diameter 15MM micro stepper motor and 15*12*30 precision metal reduction gearbox combi...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• GM12-15BY Mini Full Metal Gear Stepper Motor DC5v 2 Phase 4 Wire 15mm

  

  ...Stepper Stepping Motor For Tiny Controls Stepper Motor SM10 motor worm gearbox is the use of diameter 15MM micro stepper motor and 15*12*30 precision metal reduction gearbox combination, the reduction ratio ...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Micro Stepper Motor 10mm Small stepper motor 2 Phase Linear slider motor

  

  ... is 18 degrees, and it takes 20 steps to complete a revolution. The thrust of the motor is about 120~ 150g (thrust is 1.2~1.5N), and the frequency is suitable (300~800PPS). Please ensure that the load of the...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier