| Sign In | Join Free | My burrillandco.com |
|
...Drop Testing Machine This machine is specially used for testing the durability of the shell of small electronic products, the performance of the internal structure to resist (heavy) fall and the adaptability...
...Drop Testing Machine This machine is specially used for testing the durability of the shell of small electronic products, the performance of the internal structure to resist (heavy) fall and the adaptability...
IEC 60335-2-4 100mm Drop Test Device Products Introduction: The drop test device is specially designed and manufactured according to IEC 60335-2-4 (par. 21.101) and IEC 60335-2-7 (par. 21.101.1). It is ......
... Compliance- Package drop impact test machine ISO 2248 JIS Z0202-87 GB/T4857.5-92 QC/T743/744 etc. Feature- Drop Test Machine 1 With up and down displacement limitation, safety reliable. 2.Lifting height con...
...Test Equipment , Directional (controlled) Drop Test Machine Directional (controlled) drop tester JD-6001A One. product description: 1. Mobile phone chargers, etc. (other electronic products) The 2m direction...
...Drop Test Product Information: The horizontal surface conforms to the standard requirements of IEC 60065-1:2014 Clause 12.1.5, IEC 62368-1:2018 Annex T.7, IEC 60950-1: 2013 Clause 4.2.6 and etc. It is used t...
... 60335-2-3 Clause 21.101 Power Supply AC220V, 60HZ Drive method Motor and CAM drive Station Single Test Times 1~999999, adjustable Working Speed ≤20 r...
...dropped or accidentally impacted with hard substance. To prevent further damages in advance, this tester is designed to test and find out the ultimate solution for the package products with a purpose to redu...
...: This device is suitable for checking whether plug-ballast/transformers and mains socket-outlet-mounted luminaires have adequate mechanical strength. Test sample: Plug-ballast/transformers and mains socket-...
... 26.3, figure 19. It is used to test the mechanical strength of rewirable plugs and vehicle connector which is equipped with flexible cable. Test principle: The free end of the cable and an additional rope o...
...Drop Testing Machine 15 Times/Min This machine is specially used for testing the durability of the shell of small electronic products, the performance of the internal structure to resist (heavy) fall and th...
...Drop Testing Machine 15 Times/Min This machine is specially used for testing the durability of the shell of small electronic products, the performance of the internal structure to resist (heavy) fall and th...
LIYI Battery Free Fall Drop Test Equipment Battery Drop Tester ► Product purpose: This machine is applicable to the free falling test of small consumer electronic products and parts such as mobile phones (mobil...
...strict quality control. This test machine systematically analyzes and digitizes the case of impact due to fall or collision during transportation. Therefore, in order to keep the package intact and avoid the...
...Display Type HME Filter Pressure Drop testing machine 0-70L/min Gear for Your Requirements The Pressure Drop Testing Equipment is a sophisticated and reliable tool designed for accurate measurement of pressu...
...Drop Test Machine High-Speed Impact GB 811 Standards: GB 811,ECE R22.05 Helmet anti-shedding tester use: Apply a certain amount of initial load to the rear of the helmet, and then drop the weight from a cert...
...Drop Test Equipment for Large Heavy Package With ISO JIS IEC Standard Application: 300 kg Packaging Drop Test Equipment for Large Heavy Package With ISO JIS IEC Standard is applied to assess the package in t...
...test the damage of the product package from falling, and to evaluate the impact strength during transportation and handling. 2), the design of applicable standards: ISO2248 JISZ0202-87 GB/T4857.5-92 3), the ...
...Drop Test Equipment for Large Heavy Package With ISO JIS IEC Standard Application: 300 kg Packaging Drop Test Equipment for Large Heavy Package With ISO JIS IEC Standard is applied to assess the package in t...
... transportation or rough handling processes. The test is applicable to three key areas of a container—its faces, corners, and edges—and meets the specifications outlined in various industry standards, such a...