| Sign In | Join Free | My burrillandco.com |
|
...Hydro Turbine Advantage of Impact Type Pelton Hydro Turbine 1. Adapt to the situation where the ratio of flow and head is relatively small. 2. The weighted average efficiency is very high, and the efficiency...
...the hydro-turbine generator set are as follows: 1. Close the water inlet, and no water can pass through the guiding blades, and the dao hydro-turbine generator set can enter the maintenance state and the sta...
Hydroelectric Power Plant 40000kw Bulb Hydro Turbine Generator 3000KW Bulb Tubular Type Rated Power Bulb Hydro Turbine Generator The introduction of tubular type hydro turbine After many years of design, manufa...
...number of excitation ampere turns is limited, so a higher power factor is selected. The moment of inertia and inertia time constant of the hydro-generator of the bulb-type unit are small, so the speed rise r...
...Hydro Turbine / Francis Water Turbine for Capacity below 20MW Hydropower Project Applications: 1. Water head: 10m -- 300m 2. Power: 0.1MW -- 30MW 3. Frequency: 50/ 60hz 4. Output Type: 0.4KV, 3.3KV, 6.3KV, o...
... to 300m. They are in both vertical or horizontal shaft arrangement and could be vastly selected by the hydraulic power stations. lts feature is that the water flow enters the runner inward in a radial direc...
...Turbine Runner for Francis Turbine Capacity 0.1MW - 20MW Descrition: The Francis type turbine is mostly suitable for hydropower stations with medium or high head from 10m to 300m. They are in both vertical o...
...Turbine Runner with Water Head From 10m - 300m Specifications: Type Horizontal/vertical Francis turbine Water head 10m -- 300m. Installation capacity From 0.1MW to 20MW Runner material Stainless steel (0Cr13...
... water turbine Optimized design for high performance in a wide range of flow and head conditions Heavy-duty construction for durability and long service ......
...Hydro Turbine has an outlet flow rate of 1.8 M3/s, which means that it can handle a large volume of water flow. It is made of high-quality stainless steel material that ensures durability and long-lasting pe...
...hydro turbine generator is designed to efficiently convert the kinetic energy of falling water into electricity, making it a cost-effective and environmentally friendly power source. With a water head range ...
... used for electrical power production. The power output generally ranges from 100KW to 300MW. Normally, Medium size and larger Francis turbines are most often arranged with a vertical shaft, Small francis tu...
...Kaplan Hydro Turbine: The Ultimate Hydraulic Power Generator The Kaplan Hydro Turbine is a state-of-the-art hydraulic water turbine that is designed to provide efficient and reliable power generation. This v...
...Hydro Power Generator Pelton Francis Turbine The Francis turbine was developed by James Bichens Francis around 1855. Its key characteristic is the fact that water changes direction as it passes through the t...
... small river, small dam, etc. The mini axial turbine generator is made by generator and Impeller coaxial. Working principle and installation method: Choose suitable installation place ( riverside, rocky plac...
...Hydro Turbine / Francis Water Turbine for 10m - 300m Applications: 1. Water head: from 10m to 300m 2. Power: 100kw to 30MW 3. Frequency: 50hz or 60hz 4. Output Type: 400V, 3.3KV, 6.3KV, or 10.5KV AC three ph...
Hydropower Equipment, Pelton Hydro Turbine / Pelton Water Turbine with Synchronous Generator, Speed Governor, Inlet Valve Descrition: A Pelton wheel is an impulse-type water turbine invented by American invento...
... is designed to meet the demand of clean renewable energy. It is a cost-effective solution for hydro-power generation. It is capable of rated power ranging from 300KW to 50MW, and the rated water head range ...