| Sign In | Join Free | My burrillandco.com |
|
AC One Module 2 Poles SPD Lightning Protector for Power Supply System AC One Module 2 Poles SPD Lightning Protector Features: • One module-2 poles lightning arrester. • Anti-shock protection, indoor fixed insta...
...Lightning 10kv Surge Arrester Polymer lightning 10kV surge arrester is mainly applicable for protection of the power equipment like transformers against system over-voltages and lightning surges. It is manuf...
... Co., Ltd. to independently develop and produce lightning strike hazards. It is suitable for all kinds of buildings, structures, communication base stations, meteorological stations, radar stations, oil and ...
...Lightning Rod Early HD-Y04 optimized lightning rod Single-pin lightning arrester, HD series lightning rod is based on the traditional Franklin type lightning rod, according to GB 50057-2010 and IEC 61024 sta...
...Lightning Rod Early HD-Y04 optimized lightning rod Single-pin lightning arrester, HD series lightning rod is based on the traditional Franklin type lightning rod, according to GB 50057-2010 and IEC 61024 sta...
... is suitable for the new energy solar photovoltaic power generation systems or other dc power supply system of lightning protection. • Protective level up(KV): 2.6 • The maximum continuous operating voltage ...
LSA PLUS krone block surge arrester for telephone / measurement / control TSTLP TS-DP10 LSA krone block surge arrester is designed as per IEC 61643-21:2000,based on the LSA-PLUS wiring technology,providing surg...
40kA mov type surge arrester class 1 for distribution room / cabinet TSTLP mov surge arrester ( follows standards IEC 61643-11; GB 18802.1;YD/T 1235.1) is designed to protect low voltage devices from surge dama...
LSA PLUS krone block surge arrester for telephone / measurement / control TSTLP TS-DP10 LSA krone block surge arrester is designed as per IEC 61643-21:2000,based on the LSA-PLUS wiring technology,providing surg...
40kA mov type surge arrester class 1 for distribution room / cabinet TSTLP mov surge arrester ( follows standards IEC 61643-11; GB 18802.1;YD/T 1235.1) is designed to protect low voltage devices from surge dama...
...TUV BR275-20 4P 275 V Surge Protective Device Type 3 Lightning Surge Arrester Features: Protecting low-voltage consumers' installations against indirect lightning discharges. High performance varistor wi...
Introduction: This Tester is used to verify the electrical performance of Zinc Oxide Arrester. The instrument is suitable for various kinds of voltage levels zinc oxide arrester de-energized testing or energize...
... 50kA Surge Protection Device 275v Surge Arrester Class I+II spd Class I+II spd over voltage protection Features: Protecting low-voltage consumers' installations against indirect lightning discharges Hig...
...8kV, and is designed with a waveform of 10/350 and a rated frequency of 50/60Hz. It is easy to install and mount on a DIN Rail 35 Mm. for efficient use. T1+T2 Surge Arrester B+C also includes a 5 Year Warran...
..., ensuring optimal performance and longevity. With a Type 2/Class II classification, our PV surge protection device is designed to protect against indirect lightning strikes and...
...lightning protection measure adopted by Zhejiang toer Electric Co., Ltd. for electrical system. It is used to protect the lightning protection device of home housing. The lightning protection device is used ...
... standard. Using advanced active energy pilot discharge technology, the lightning rod can actively monitor the change of the electric field around the surrounding area. By the forced discharge, it can active...
... arrester to earth. The unit is equipped with an RM (Remote) input port, to detect any changes from the lightning current/surge arrester RM terminal, and remote location, distance approx. 300m maximum. as we...