| Sign In | Join Free | My burrillandco.com |
|
255v / 385v Type 1 and 2 lightning current arrester for home / commercial use TS-255BC25/4 Lightning Current Arrester conforming to IEC 61643-11 standards is designed to protect low voltage devices from surge d...
33KV Gray Polymer-housed Lightning Current Arrester Description: Polymer surge arrester is a device to protect electrical equipment from over-voltage transients caused by external (lightning) or internal (switc...
... of core componet mainly adopt zine oxide arrester. Compared with the conventional silicon carbide arrester, this presciption of the product improves gr-eatly the volt-Ampere characterisics of the resistor d...
... 8/20 ms Lightning current impulse HY10W-3 3 2.55 9.5 7.7 9 100 100 HY10W-6 6 5.1 19.5 15.4 18 100 100 HY10W-9 9 7.65 28.5 23. 1 ......
... arresting capacity up to 25 kA (10/350μs) per pole. • Normal discharge current (8/20us) In: 25kA / 50kA. • Max. discharge current (8/20us) Imax: 100kA. • Labeled connections. • Protection class: B. • Compos...
...-500kV surge arresters used for GAS Insulated Switchgear(GIS),energy absorbers for series compensation device, shielded plug-insurge arresters, and electrical instruments, which have been exported to many co...
... transient overvoltage hazards and to limit the duration and often the magnitude of the renewal current. The term includes any external clearance necessary for the normal function of the appliance when insta...
...valve-type arrester including silicon carbide common valve type (FZ and FS), silicon carbide magnetic blow valve-type (FCZ and FCD) and zinc oxide arrester. Work environment 1. Ambient temperature: -10ºC~+50...
... Lightning Surge Arrester 6-10kV Medium-voltage surge arresters The Zinc Oxide lighting arrester are used for protection of electrical equipment from all kind of over-voltages caused by lightening or switchi...
IEC standard 15KV composite MOA surge arrester , color red with high quality disconnecter Description: Each surge arrester is made up of a series of varistor blocks . HIVOLT has very experienced cability in ma...
...Lightning Surge Arrester Module , Power Surge Protection Device OBV10-I-15 Surge protectors OBV10-I-15 meet the type 1 requirement class according to IEC 61643-11. These devices protect low-voltage consumer ...
Low voltage polymeric zinc oxide arrester distribution lightning arrester surge arrester from factory Features Small size, light weight, collision resistance, no loss during transportation, flexible installatio...
...t the circuit breaker is open. When the voltage occurs, the impedance drops to a few Europe, and the surge current will flow through the surge protector and will not enter the device. At the same time, becau...
... applications. The OBV10-I-15 provides protection against the direct and indirect effects of lightning and is particularly useful in a high lightning area where the risk of heavy surge current or even direct...
... 1. Ultra-large capacity design: peak current 12kA, optimized for short-circuit/lightning current detection in power systems. 2. High-frequency bandwidth 50MHz: supports microsecond transient waveform analys...
Lightning conductor is a device that is useful to protect the buildings from lightning strike. - Protection status not changed after lightning. - No damage occurred after lightning because of no electronic syst...
FEATURES: Wide frequency band, wide coverage. PIM optimized design. Ideal for all kind of IBS/DAS/PDAS applications. Low insertion loss. High power handling. Small size, Low weight. Good stability. Speci...
surge arrester Features: Indicator window is obvious (green is OK, red indicates failure) 2. Fully enclosed terminal 3. The shell is made of PC flame retardant material, fire insulation 4. Replaceable module su...